• 20393627 Bracket | Genuine Volvo Penta Part
1 1

20393627 Bracket | Genuine Volvo Penta Part

20393627 Bracket | Genuine Volvo Penta Part

$21.30 AUD
$21.30 AUD
Sale Sold out
Shipping calculated at checkout.

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

Genuine Volvo Penta bracket used to support and route the engine wiring harness on D9A and related industrial engines. It holds the cable and clamp assembly clear of heat, vibration and moving components.

🚤 Compatibility

  • Engine Family: D, TAD

Full model list at the end of this description.

⚙️ Key Features

  • Factory bracket for engine cable-harness support
  • Confirmed in D9A electrical and control-system arrangements
  • Works with original cable clamps and wiring extensions
  • Maintains harness bend radius and connector alignment
  • Reduces vibration fatigue and insulation abrasion
  • Engine type: Volvo Penta 9-litre diesel

🔌 Function

Supports and positions the engine wiring harness to prevent contact damage, connector strain and vibration fatigue.

⚠️ Common Signs of Failure

  • Harness rubbing or damaged insulation
  • Loose or broken bracket
  • Intermittent electrical faults caused by harness movement
  • Connector strain or misalignment
  • Heat damage from incorrect harness routing

🛠️ Service Notes

  • Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
  • Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
  • Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
  • Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
  • On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM / Related Numbers

  • 3841862 - related wiring harnesses
  • 21495942 - related wiring harnesses
  • 949997 - related cable clamps
  • 947827 - related cable clamps
  • 952629 - related cable clamps
  • 949746 - related cable clamps
  • 3593799 - wiring extension
  • 23001684 - related harness references
  • 22088729 - related harness references

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta D9A2J, D9A2G, D9A2L MH, D9A2D, D9A2B, D9A2F, D9A2K, D9A2H, D9A2M MP, D9A2A, D9A2C, D9A2E
  • Volvo Penta TAD940GE, TAD940VE
  • Volvo Penta TAD941VE, TAD941GE
  • Volvo Penta TAD942VE
  • Volvo Penta TAD943VE
  • Volvo Penta TAD950VE
  • Volvo Penta TAD951VE
  • Volvo Penta TAD952VE

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details