Skip to product information
1 of 1

20405649 Flywheel | Genuine Volvo Penta Part

20405649 Flywheel | Genuine Volvo Penta Part

Regular price $5,692.31 AUD
Regular price Sale price $5,692.31 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

Genuine Volvo Penta SAE 3 flywheel with a listed rotational inertia of 1.2 kgm². It carries starter ring gear 21033328 and is retained to the crankshaft with ten screws 20405654.

🚤 Compatibility

  • Engine Family: D, TD, TAD, MD

Full model list at the end of this description.

⚙️ Key Features

  • SAE 3 flywheel configuration
  • Listed rotational inertia 1.2 kgm²
  • Uses starter ring gear 21033328
  • Retained with ten hexagon screws 20405654
  • Requires run-out, ring-gear and mounting-face inspection before installation
  • Engine type: Volvo Penta four- and six-cylinder industrial diesel

🔌 Function

Stores rotational energy, smooths crankshaft speed variation and transfers engine torque to the driven equipment.

⚠️ Common Signs of Failure

  • Cracked flywheel or damaged mounting face
  • Starter ring-gear tooth damage
  • Excessive flywheel run-out
  • Loose or fretted crankshaft mounting

🛠️ Service Notes

  • Inspect the ring gear teeth for chipping, burring and one-sided wear before refitting — a damaged tooth ring will chew up a new starter pinion
  • Check the clutch or damper mating face for scoring, heat cracking and blueing, and check the crankshaft rear seal and any spigot bearing while access is good
  • Clean the crankshaft flange and the flywheel face so both are dry and free of oil, old sealant and burrs; a trace of oil on that joint is enough to let the flywheel work loose
  • Locate the flywheel the correct way round on its dowel or locating feature, and renew the bolts wherever the manual calls them single-use
  • Tighten the bolts progressively in a criss-cross pattern to the figure and stages given in the workshop manual for your engine, and never lever against the ring gear teeth to hold it

🔄 Supersession & Cross Reference

OEM / Related Numbers

  • 21033328 - starter ring gear
  • 20405654 - flywheel screws
  • 20405643 - expansion plugs

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta D5A-B TA, D5A-T, D5A-TA
  • Volvo Penta D7A-B TA, D7A-T, D7A-TA
  • Volvo Penta MD2010, MD2010B
  • Volvo Penta TAD530GE MECH, TAD530GE EDC4
  • Volvo Penta TAD531GE MECH, TAD531GE EDC4
  • Volvo Penta TAD730GE MECH, TAD730GE EDC4
  • Volvo Penta TAD731GE MECH, TAD731GE EDC4
  • Volvo Penta TAD520GE
  • Volvo Penta TAD532GE EDC4
  • Volvo Penta TAD720GE
  • Volvo Penta TAD721GE
  • Volvo Penta TAD722GE
  • Volvo Penta TAD732GE EDC4
  • Volvo Penta TAD733GE EDC4
  • Volvo Penta TD520GE
  • Volvo Penta TD720GE

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details