20412328 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket used to support the oil separator and crankcase breather pipe on the TD720GE filtered-air installation. It prevents the breather assembly from moving or fatiguing under engine vibration.

🚤 Compatibility

Typically suits:

• Volvo Penta TD720GE
• Volvo Penta TAD720GE

• Engine Family: TD, TAD

⚙️ Key Features

• Dedicated TD720GE breather support bracket
• Used beside oil separator 20412322
• Supports crankcase vent pipe 20701279
• Secured with flange screw 984734 and flange nut 990940
• Maintains hose and separator alignment
• Engine type: Volvo Penta 7-litre industrial diesel

🔌 Function

Supports the crankcase ventilation assembly and prevents movement-induced pipe or hose damage.

⚠️ Common Signs of Failure

• Breather pipe vibration
• Oil separator movement
• Repeated hose or pipe fatigue

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 20412322 - oil separator
• 20701279 - crankcase vent pipe
• 20405629 - hose
• 20405755 - hose clamps
• 20405532 - companion clamp

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging