20450002 Inlet Valve | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta inlet valve from the Engine group with a single groove machined in the stem, weighing 0.156 kg and listed for 6 applications on the TAD series. The single-groove stem is the point of the listing: the collets fitted must match that form, and a multi-groove valve will not retain correctly in the same collar.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD943VE
• Volvo Penta TAD940GE
• Volvo Penta TAD940VE
• Volvo Penta TAD941VE
• Volvo Penta TAD941GE
• Volvo Penta TAD942VE

• Engine Family: TAD
• HP Range: Approximately 380 HP

⚙️ Key Features

• Single groove machined in the stem
• 0.156 kg
• 6 applications on the TAD series
• Engine group cylinder head component

🔌 Function

Opens on the induction stroke to admit charge air to the cylinder, and seals the combustion chamber against compression and combustion pressure for the rest of the cycle.

⚠️ Common Signs of Failure

• Loss of compression on one cylinder, with hard starting or a misfire at idle
• Blue smoke and oil consumption from a worn stem and guide
• Valve seat face burnt, pitted or receded on inspection
• Stem worn, bent or picked up in the guide
• Valve clearance closing up as the valve sinks into its seat

🛠️ Service Notes

• The stem carries one groove, so the collets fitted must match that single-groove form
• Check the guide and stem seal for wear before fitting a new valve, and confirm the seat can still be cut to give the correct valve recession

🔄 Supersession & Cross Reference

Other-Brand OEM Numbers

• TRW Engine Component: 48308
• Kolbenschmidt: 48332

Aftermarket / Verified Equivalents

• DT Spare Parts: 2.10279
• Freccia: R6380/SCR
• IPSA: VL165300
• Sampa: 039.247
• Eaton: 36432
• SLP: ILV-002

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging