20450856 Screw | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta screw used in the engine auxiliary, guide and fuel-supply assembly. It is supplied as an individual service component under part number 20450856 and is intended to restore the original fit, alignment, sealing, support or operating function of the specified assembly. This listing supplies the named part only; adjoining components shown in an parts list for your engine are serviced separately unless explicitly stated.

🚤 Compatibility

• Engine Family: TD, TAD

Full model list at the end of this description.

⚙️ Key Features

• Screw with the correct Volvo Penta thread, length and head design for the engine auxiliary, guide and fuel-supply assembly
• 0.034 kg
• Listed for 26 applications across TD and TAD series engines
• 2 used per assembly

🔌 Function

Secures the specified component using the correct Volvo Penta thread, length and head design.

⚠️ Common Signs of Failure

• Screw found loose or missing at its position
• Component it secures rattling or moving under vibration
• Head corroded or the drive rounded out
• Thread seized or galled, shearing on removal
• Screw found bent or stretched on inspection

🛠️ Service Notes

• Clean the threads in the casting and check them for damage before fitting; a screw run into a dirty or pulled thread gives a false torque reading and will not hold its load
• Tighten to the torque given in the workshop manual for your engine rather than by feel, and follow the specified sequence where the joint has one
• Use the thread locking or sealing compound the manual calls for at that joint — some screws pass into oil, coolant or fuel space and have to seal as well as clamp
• Renew any screw that is stretched, corroded in the shank, or has damaged threads or a rounded head, and never reuse one that was tightened by a stretch or angle-tighten procedure
• A little marine-grade anti-seize helps later removal where the manual permits it, but keep it off threads that are meant to take a locking compound

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TAD520GE, TAD520VE
• Volvo Penta TAD530GE MECH, TAD530GE EDC4
• Volvo Penta TAD531GE MECH, TAD531GE EDC4
• Volvo Penta TAD720GE, TAD720VE
• Volvo Penta TAD721GE, TAD721VE
• Volvo Penta TAD722GE, TAD722VE
• Volvo Penta TAD730GE MECH, TAD730GE EDC4
• Volvo Penta TAD731GE MECH, TAD731GE EDC4
• Volvo Penta TD520GE, TD520VE
• Volvo Penta TD720GE, TD720VE PP
• Volvo Penta TAD420VE
• Volvo Penta TAD532GE EDC4
• Volvo Penta TAD620VE
• Volvo Penta TAD732GE EDC4
• Volvo Penta TAD733GE EDC4
• Volvo Penta TD420VE