Skip to product information
1 of 1

20459896 Plug | Genuine Volvo Penta Part

20459896 Plug | Genuine Volvo Penta Part

Regular price $11.64 AUD
Regular price Sale price $11.64 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

A genuine Volvo Penta plug used in the engine fluid passage or service-port closure. It is supplied as an individual service component under part number 20459896 and is intended to restore the original fit, sealing, alignment, retention or operating function of the specified assembly. This listing supplies the named part only; adjoining components shown in the engine arrangement are serviced separately unless explicitly stated.

🚤 Compatibility

  • Engine Family: TD, TAD

Full model list at the end of this description.

⚙️ Key Features

  • Plug closing an engine service port or passage
  • 0.005 kg
  • Listed against the same 24 TD and TAD fitments as terminal 20459895

🔌 Function

Closes the designated service port or engine passage and maintains system sealing.

⚠️ Common Signs of Failure

  • Fluid or pressure leakage develops around the plug
  • Threads are stripped, crossed or corroded
  • The plug is seized or cannot be removed for service
  • The sealing face or related gasket is damaged
  • The plug repeatedly loosens under vibration

🛠️ Service Notes

  • Clean the threads and the seating face before fitting, and make sure the opening itself is clear of old sealant, swarf and corrosion
  • Renew the sealing washer or O-ring where one is fitted rather than reusing a flattened one, and only use thread sealant where the workshop manual for your engine calls for it
  • Tighten to the figure given in the workshop manual for your engine — plugs in aluminium and other soft castings strip easily, and a plug pulled up hard to cure a leak usually distorts the seat and makes it worse
  • Where the plug closes an oil, fuel or coolant passage, run the engine up to temperature afterwards and check the joint under pressure before signing the job off
  • Keep removed plugs paired with the holes they came out of during a strip-down — plugs of very similar appearance often differ in thread, reach or sealing type

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta TAD520GE, TAD520VE
  • Volvo Penta TAD530GE MECH, TAD530GE EDC4
  • Volvo Penta TAD531GE MECH, TAD531GE EDC4
  • Volvo Penta TAD720GE, TAD720VE
  • Volvo Penta TAD721GE, TAD721VE
  • Volvo Penta TAD722GE, TAD722VE
  • Volvo Penta TAD730GE MECH, TAD730GE EDC4
  • Volvo Penta TAD731GE MECH, TAD731GE EDC4
  • Volvo Penta TAD420VE
  • Volvo Penta TAD532GE EDC4
  • Volvo Penta TAD620VE
  • Volvo Penta TAD732GE EDC4
  • Volvo Penta TAD733GE EDC4
  • Volvo Penta TD420VE
  • Volvo Penta TD520GE
  • Volvo Penta TD720GE

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details