20482741 Inlet Valve | Genuine Volvo Penta Part
20482741 Inlet Valve | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Standard-size inlet valve for Deutz-derived Volvo Penta D4D/D6D and related TAD engine cylinder heads. Documented dimensions are approximately 119.3 mm overall length, 41.7 mm head diameter and 8 mm stem diameter, with a 30-degree seat.
🚤 Compatibility
- HP Range: Approximately 300 HP
- Year Range: Approximately late 1990s-2000s
⚙️ Key Features
- OEM valve head, stem length and seat-angle specification
- Maintains combustion sealing and correct intake or exhaust gas flow
- Designed for high-cycle cylinder-head operation and temperature exposure
- Requires valve-guide, seat and spring inspection during installation
- Suitable for professional cylinder-head overhaul
- Engine type: Deutz-derived four- and six-cylinder turbocharged Volvo Penta diesel
🔌 Function
Opens and closes the cylinder-head gas port at the correct point in the engine cycle and seals against the valve seat during compression and combustion.
⚠️ Common Signs of Failure
- Low compression or cylinder leakage through the inlet valve
- Hard starting, rough running or reduced power
- Bent, burnt, recessed or pitted valve face
- Poor cylinder filling caused by a valve that does not open or seat correctly
🛠️ Service Notes
- Keep valves in order and fit each one to the seat it is lapped to; a new valve must be lapped in until a continuous, even contact band shows right round
- Check the guide for wear before fitting a new valve — a good valve in a worn guide will not seat or seal for long
- Clean the deposits from the port and seat, wash every trace of lapping paste out of the head, and lubricate the stem with clean engine oil on assembly
- Fit new stem seals and check installed spring height and valve recess against the figures in the workshop manual for your engine
- Set the valve clearances on assembly and re-check them after the first running period, following the procedure for your engine
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 20482741 → Supersedes 20791517 → Supersedes 20459862
OEM / Related Numbers
- 20791517 earlier number superseded by this part
- 20459862 earlier number superseded by this part
Other-Brand OEM Numbers
- Deutz: 04283376
- Deutz: 04254934
Aftermarket / Verified Equivalents
- OE Germany: 040520201200
- OE Germany: 03 0520 600000
- SLP: ILV-741
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
