20499647 Terminal | Genuine Volvo Penta Part

🔧 Product Description

Electrical connection or indication component used in the engine installation, wiring, hose or enclosure service assembly. It restores the original connection, grounding or warning-display function.

🚤 Compatibility

Typically suits:

• Volvo Penta TD420VE
• Volvo Penta TAD620VE
• Volvo Penta TAD720VE
• Volvo Penta TAD721VE
• Volvo Penta TAD722VE
• Volvo Penta TAD420VE
• Volvo Penta TAD520VE

• Engine Family: TD, TAD
• Year Range: Approximately late 1990s-2010s, depending on engine and installation

⚙️ Key Features

• Terminal, 0.001 kg
• Listed for 7 applications across TD and TAD engines
• Shares its fitment list with connector 20499646

🔌 Function

Provides the specified electrical or fluid connection while maintaining retention, alignment and environmental protection.

⚠️ Common Signs of Failure

• Intermittent electrical operation or unexplained fault codes
• Corrosion, heat damage or looseness at the contact surfaces
• Excessive voltage drop across the connection
• Broken conductor strands, damaged insulation or poor terminal retention

🛠️ Service Notes

• Use the correct crimp tool and die for the terminal size — a ratcheting crimper is what makes a marine crimp reliable — and pull-test every finished crimp before it goes back in service
• Strip only as much insulation as the barrel will take: no stray strands outside the barrel and no insulation trapped inside it
• Seal the finished crimp against moisture, adhesive-lined heat shrink over the joint being the usual method on a boat
• Crimp rather than rely on solder: solder alone is not an acceptable marine connection, and the stiff spot where the solder ends cracks the strands with vibration
• Clean the mating post or pin to bright metal, tighten to the figure in the manual for your engine, and support the cable so vibration is taken by the clip and not by the terminal

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging