20512323 Connector | Genuine Volvo Penta Part
20512323 Connector | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
This genuine Volvo Penta connector is an OEM service component used in the Switch / Sensor Relay Connector. It is manufactured to the original Volvo Penta dimensional, material and interface requirements for the documented Volvo Penta 4-litre TAD4 industrial diesel application. Technical identification: Electrical connector in the switch, sensor and relay circuit. In service, it provides a keyed, protected electrical connection and retains the correct terminals in their specified positions. Selection must be confirmed by OEM part number 20512323, the exact model/product number, serial number and installed assembly configuration.
🚤 Compatibility
- Engine Family: TD, TAD
Full model list at the end of this description.
⚙️ Key Features
- Genuine Volvo Penta OEM connector
- OEM part number 20512323
- Technical distinction: Electrical connector in the switch, sensor and relay circuit
🔌 Function
Provides a keyed, protected electrical connection and retains the correct terminals in their specified positions. Match connector keying and terminal positions, protect the harness from heat/chafing and verify continuity, insulation and voltage drop before commissioning.
⚠️ Common Signs of Failure
- Intermittent warning lamps or sensor faults that come and go with vibration
- The engine cutting out or refusing to start after the harness has been disturbed
- Fault codes for an open circuit on the affected sensor or relay
- Green or white corrosion on the terminals when the connector is opened
- The latch broken, or terminals pushed back out of their locking positions
🛠️ Service Notes
- Goes together with 20715643 and 20715645 - order the matching parts with the connector
- Check terminal tension and the harness for chafing before condemning the sensor or relay at the other end of the circuit
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
🔎 Full Model Compatibility
Typically suits:
- Volvo Penta TAD520GE, TAD520VE
- Volvo Penta TAD530GE MECH, TAD530GE EDC4
- Volvo Penta TAD531GE MECH, TAD531GE EDC4
- Volvo Penta TAD720GE, TAD720VE
- Volvo Penta TAD721GE, TAD721VE
- Volvo Penta TAD722GE, TAD722VE
- Volvo Penta TAD730GE MECH, TAD730GE EDC4
- Volvo Penta TAD731GE MECH, TAD731GE EDC4
- Volvo Penta TAD420VE
- Volvo Penta TAD532GE EDC4
- Volvo Penta TAD620VE
- Volvo Penta TAD650VE
- Volvo Penta TAD660VE
- Volvo Penta TAD732GE EDC4
- Volvo Penta TAD733GE EDC4
- Volvo Penta TAD750VE
- Volvo Penta TAD760VE
- Volvo Penta TD420VE
- Volvo Penta TD520GE
- Volvo Penta TD720GE
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
