20513656 Banjo Fitting | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta banjo fitting is an OEM service component used in the Air-Compressor Oil-Line Banjo Fitting. It is manufactured to the original Volvo Penta dimensional, material and interface requirements for the documented Volvo Penta TAD4/TAD6 industrial diesel application. Technical identification: Banjo fitting for the air-compressor lubricating-oil line. In service, it transfers or controls lubricating oil so bearings, piston-cooling components and auxiliary equipment receive the required flow and pressure. Selection must be confirmed by OEM part number 20513656, the exact model/product number, serial number and installed assembly configuration.

⚙️ Key Features

• Genuine Volvo Penta OEM banjo fitting
• OEM part number 20513656
• Technical distinction: Banjo fitting for the air-compressor lubricating-oil line

🔌 Function

Transfers or controls lubricating oil so bearings, piston-cooling components and auxiliary equipment receive the required flow and pressure. Install without twist or preload, renew the specified seals/clamps, preserve the original routing and pressure- or leak-test the circuit after assembly.

⚠️ Common Signs of Failure

• Oil weeping from the banjo joint, or a drip that appears after shutdown
• The banjo bolt found loose or the joint wet at service
• Oil pressure loss traced to the compressor feed
• On removal, scored or distorted sealing faces on the banjo eye
• The feed drilling partly blocked with sludge or carbon

🛠️ Service Notes

• Check that the feed drilling is clear before refitting - a blocked banjo starves the compressor even with a new line
• A banjo joint seals on the washers either side of the eye, so renew them rather than reusing the crushed originals

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging