20550332 Air Pressure Pipe | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta Air Pressure Pipe - Part Number: 20550332

This genuine Volvo Penta air pressure pipe is an OEM service component used in the Fuel-System Air-Pressure / Control Pipe. It is manufactured to the original Volvo Penta dimensional, material and interface requirements for the documented Volvo Penta 5-litre TAD5 industrial diesel application. Technical identification: Air-pressure pipe in the TAD520VE fuel-system control assembly; catalogue key 2. In service, it carries compressed intake air while maintaining boost pressure, flow area and sealed connections. Selection must be confirmed by OEM part number 20550332, the exact model/product number, serial number and installed assembly configuration.

⚙️ Key Features

• Genuine Volvo Penta OEM air pressure pipe

• OEM part number 20550332

• Documented application: Fuel-System Air-Pressure / Control Pipe

• Validated engine/application family: Volvo Penta 5-litre TAD5 industrial diesel

• Technical distinction: Air-pressure pipe in the TAD520VE fuel-system control assembly; catalogue key 2

• Primary function: Carries compressed intake air while maintaining boost pressure, flow area and sealed connections.

• Install without twist or preload, renew the specified seals/clamps, preserve the original routing and pressure- or leak-test the circuit after assembly.

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 20550332 (current/original OEM service reference)

OEM / Related Numbers:

• 20550332

Aftermarket / Verified Equivalents:

• No aftermarket equivalent

🚤 Compatibility

Commonly used on:

• Fuel-System Air-Pressure / Control Pipe

Typically suits:

• Engine / product models:

• TAD520VE

• Engine / Application Family: Volvo Penta 5-litre TAD5 industrial diesel

• Serial / Configuration Note: Confirm the actuator/control arrangement, hollow screw/sealing washers, pipe geometry and engine serial number.

🔌 Function

Carries compressed intake air while maintaining boost pressure, flow area and sealed connections. Install without twist or preload, renew the specified seals/clamps, preserve the original routing and pressure- or leak-test the circuit after assembly.

Common signs of failure:

• Loss of boost pressure and reduced power under load

• Black smoke or increased exhaust temperature from insufficient air

• Oil mist or soot staining around the joint

• Whistling, hissing or split pipe/hose symptoms during boost

• Dirt ingress or sensor/heater faults caused by a damaged connection

📦 Condition

• Genuine Volvo Penta part

• Brand new

• Supplied in original or equivalent packaging