Skip to product information
1 of 1

20565188 Bearing | Genuine Volvo Penta Part

20565188 Bearing | Genuine Volvo Penta Part

Regular price $301.87 AUD
Regular price Sale price $301.87 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

A genuine Volvo Penta bearing used in the rotating shaft or engine support assembly. It is supplied as an individual service component under part number 20565188 and is intended to restore the original fit, sealing, alignment, retention or operating function of the specified assembly. This listing supplies the named component only; adjoining parts are serviced separately.

🚤 Compatibility

  • Engine Family: D, TD, TAD, MD

Full model list at the end of this description.

⚙️ Key Features

  • Precision bore and outside diameter maintain the specified running or interference clearance
  • Bearing surface supports the documented radial, axial or oscillating load
  • Material and surface finish are selected for the corresponding shaft and lubricant
  • Maintains shaft, gear, fan or housing alignment under engine vibration
  • Measure the mating journal or bore before installation
  • Renew related seals, thrust components or lubrication passages during overhaul
  • Engine type: Volvo Penta D16 inline-six industrial diesel
  • 0.50mm (Volvo assembly listing)

🔌 Function

Supports a rotating shaft or engine component with controlled friction and clearance.

⚠️ Common Signs of Failure

  • Rumbling or roughness develops
  • Excessive play is measured
  • Heat or vibration increases
  • The bearing binds or seizes
  • Metal debris is found

🛠️ Service Notes

  • Keep the bearing wrapped until you fit it and work clean — dirt trapped in at assembly is a leading cause of early failure
  • Inspect the shaft and housing seats for wear, scoring and burrs; a new bearing in a worn seat only repeats the failure
  • Press or drive squarely on the race being fitted, using a drift or tube that contacts the ring face fully, so the load never passes through the balls, rollers or bearing surface; never strike the bearing itself
  • Lubricate with the grade specified for that assembly, and where the bearing takes an adjustable preload or endfloat, set it by the workshop manual procedure rather than by feel
  • Renew the adjacent seal whenever a bearing is replaced — access is already open, and a failed seal is often what killed the bearing

🔄 Supersession & Cross Reference

OEM Supersession Chain

  • 20565188 → Supersedes 11700318

OEM / Related Numbers

  • 21203689 earlier number superseded by this part
  • 20460203 earlier number superseded by this part
  • 11700318 earlier number superseded by this part
  • 20565150 - Related Bearing
  • 20565204 - Related Gasket
  • 20565408 - Related D16 Crankshaft Vibration Damper
  • 20565843 - Related Lock Brace
  • 8131247 - Crankshaft references
  • 22235130 - Crankshaft references
  • 270929 - Thrust-washer kits
  • 270930 - Thrust-washer kits
  • 270931 - Thrust-washer kits
  • 270932 - Thrust-washer kits
  • 20578851 - Related main-bearing kits
  • 20586596 - Related main-bearing kits
  • 20700881 - Related main-bearing kits
  • 20578853 - Additional main-bearing-kit references
  • 20700890 - Additional main-bearing-kit references
  • 20700891 - Additional main-bearing-kit references
  • 21254035 - Cylinder-liner kit
  • 20737361 - Cylinder liner
  • 20520607 - Sealing-ring kits
  • 22179684 - Sealing-ring kits
  • 20737366 - Piston pin
  • 20898595 - Connecting-rod references
  • 21527863 - Connecting-rod references
  • 21535917 - Connecting-rod references
  • 20586602 - Big-end bearing kits
  • 20586603 - Big-end bearing kits
  • 20586604 - Big-end bearing kits
  • 20586606 - Big-end bearing kits

Other-Brand OEM Numbers

  • Kolbenschmidt: 77687620

Aftermarket / Verified Equivalents

  • King: CR1635CP0.5

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta D7A-B TA, D7A-T, D7A-TA, D7C-B TA, D7C-TA
  • Volvo Penta D5A-B TA, D5A-T, D5A-TA
  • Volvo Penta MD2010, MD2010B
  • Volvo Penta TAD520GE, TAD520VE
  • Volvo Penta TAD530GE MECH, TAD530GE EDC4
  • Volvo Penta TAD531GE MECH, TAD531GE EDC4
  • Volvo Penta TAD720GE, TAD720VE
  • Volvo Penta TAD721GE, TAD721VE
  • Volvo Penta TAD730GE MECH, TAD730GE EDC4
  • Volvo Penta TAD731GE MECH, TAD731GE EDC4
  • Volvo Penta TD520GE, TD520VE
  • Volvo Penta TD720GE, TD720VE PP
  • Volvo Penta TAD550GE
  • Volvo Penta TAD551GE
  • Volvo Penta TAD722GE
  • Volvo Penta TAD750VE
  • Volvo Penta TAD760VE

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details