20711223 Pulley | Genuine Volvo Penta Part

🔧 Product Description

A genuine approximately 155 mm water-pump pulley used in Volvo Penta D13 cooling-system installations including TAD1340VE and D13B-A MP. It drives the coolant pump through the specified belt system.

🚤 Compatibility

• Engine Family: D, TAD

Full model list at the end of this description.

⚙️ Key Features

• Approximately 155 mm pulley diameter
• Water-pump pulley geometry matched to the D13 cooling-system drive
• Hub and mounting interface maintain concentricity with the pump spindle
• Belt grooves match the documented auxiliary-drive profile
• Correct alignment protects pump bearings and belt edges
• Inspect pump spindle, belt and tensioner whenever the pulley is replaced

🔌 Function

Transfers belt drive to the engine coolant pump.

⚠️ Common Signs of Failure

• The pulley wobbles or runs out of true
• Belt tracking moves off centre
• Grooves are worn, cracked or damaged
• The hub or mounting interface becomes loose
• Pump-bearing noise or repeated belt wear develops

🛠️ Service Notes

• Inspect the belt running surfaces before fitting — a pulley with glazed, scored, pitted or rust-roughened grooves will chew through a new belt in very little running time
• Check that the pulley runs true and that its bearing or bush turns smoothly with no roughness or side play; fit a new belt whenever a pulley is changed
• Confirm that every pulley in the drive lies in the same plane and that the belt profile matches each groove — misalignment shows up as belt dust, squeal or a worn belt edge and will destroy a new belt quickly
• Fit onto a clean, dry, burr-free shaft or hub face and tighten the retaining fasteners in the sequence and to the figures given in the workshop manual for your engine
• Turn the engine over by hand before starting to confirm the belt is fully seated in every groove and that nothing fouls, then recheck belt tension after the first running period

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 3801102 - Related coolant-pump references
• 3801418 - Related coolant-pump references
• 22195450 - Related coolant-pump references
• 3801741 - Related coolant-pump references
• 22902431 - Related coolant-pump references
• 3979940 - Related pump spindle
• 21412639 - Related thermostat
• 3849305 - Related coolant-pipe references
• 22533336 - Related coolant-pipe references

Aftermarket / Verified Equivalents

• DT Spare Parts: 2.15451, 155 mm pulley
• Klotze Technic: KT09404 water-pump pulley
• febi Bilstein: 179536
• Auger: 55698
• Sampa: 030.291

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D13C4-B MH, D13C1-B MH, D13C2-B MP, D13C1-A MP, D13C2-A MP, D13C3-A MP, D13C4-A MP, D13B-A MP, D13B-H MP, D13B-G MP, D13B-L MP, D13B-E MG, D13B-E MG (FE), D13B-E MH, D13B-E MH (FE), D13B-F MG, D13B-F MG (FE), D13B-K MP, D13B-N MH, D13B-N MH (FE), D13B-B MP, D13B-D MP, D13B-J MP, D13B-M MP, D13B-C MP, D13C4-B MP, D13C5-B MP, D13C6-A MP, D13C1-A MH, D13C2-A MH, D13C1-B MG, D13C3-B MG, D13C2-B MG, D13C4-B MG, D13C5-A MP, D13C2-A MG, D13C1-A MG, D13C7-B MP, D13C8-B MP
• Volvo Penta TAD1341-43GE-B, TAD1341VE, TAD1341GE
• Volvo Penta TAD1344-45GE-B, TAD1344VE, TAD1344GE
• Volvo Penta TAD1342VE, TAD1342GE
• Volvo Penta TAD1343VE, TAD1343GE
• Volvo Penta TAD1345GE, TAD1345VE
• Volvo Penta TAD1350GE, TAD1350VE
• Volvo Penta TAD1351GE, TAD1351-53VE
• Volvo Penta TAD1340VE
• Volvo Penta TAD1352GE
• Volvo Penta TAD1353GE
• Volvo Penta TAD1354GE
• Volvo Penta TAD1355GE
• Volvo Penta TAD1360-62VE
• Volvo Penta TAD1363-65VE
• Volvo Penta TAD1371-75VE