• 20768688 Hose Clamp | Genuine Volvo Penta Part
1 1

20768688 Hose Clamp | Genuine Volvo Penta Part

20768688 Hose Clamp | Genuine Volvo Penta Part

$14.95 AUD
$14.95 AUD
Sale Sold out
Shipping calculated at checkout.

In stock — Australian warehouse

Typically reaches our store in 3–5 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

Application-specific hose clamp used in the inlet manifold, charge-air and cold-start heater circuit on the listed Volvo Penta engines. Clamps the inlet-heater or charge-air hose to its connection without allowing boost leakage or hose movement.

🚤 Compatibility

Typically suits:

  • Volvo Penta TAD720VE
  • Volvo Penta TAD721VE
  • Volvo Penta TAD722VE
  • Volvo Penta TAD750VE
  • Volvo Penta TAD520GE
  • Volvo Penta TAD530GE MECH
  • Volvo Penta TAD530GE EDC4
  • Volvo Penta TAD531GE MECH
  • Volvo Penta TAD531GE EDC4
  • Volvo Penta TAD760VE
  • Engine Family: TAD
  • HP Range: Approximately 150-300 HP
  • Year Range: Approximately 1999 - 2015

⚙️ Key Features

  • Genuine Volvo Penta hose clamp
  • Designed for the inlet manifold, charge-air and cold-start heater circuit
  • Clamps the inlet-heater or charge-air hose to its connection without allowing boost leakage or hose movement
  • Engine type: Four- and six-cylinder turbocharged industrial diesel
  • Quantity varies by assembly, most commonly one

🔌 Function

Clamps the inlet-heater or charge-air hose to its connection without allowing boost leakage or hose movement.

⚠️ Common Signs of Failure

  • Whistling or hissing from the inlet connection under boost
  • Power loss, black smoke or a boost fault as charge air escapes at the hose
  • The hose visibly creeping off its spigot or blowing off under load
  • On inspection the clamp band is corroded, cracked or has a stripped worm drive
  • A deep cut in the hose wall where an over-tightened or distorted clamp has bitten in

🛠️ Service Notes

  • Inspect the mating bracketry and all isolators before installation.
  • Tighten the hardware only after the supported component is correctly aligned.

🔄 Supersession & Cross Reference

OEM Supersession Chain

  • 20768688 → Supersedes 20524142

OEM / Related Numbers

  • 20524142 earlier number superseded by this part
  • 20550368 - earlier 24V heater/insulator reference
  • 20532254 - 12V inlet heater
  • 20758403 - 24V inlet heater
  • 20550336 - companion insulators
  • 20521558 - companion insulators
  • 20726089 - positive connector
  • 20498524 - O-ring
  • 20531832 - gasket
  • 20405613 - charge-air gasket
  • 20405614 - cover
  • 21011717 - charge-air pipes
  • 22328869 - charge-air pipes
  • 21385453 - pressure sensor
  • 21311705 - relay

Other-Brand OEM Numbers

  • VOE20768688 - Volvo Construction Equipment prefixed number format

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details