20862692 Adapter | Genuine Volvo Penta Part
20862692 Adapter | Genuine Volvo Penta Part
Couldn't load pickup availability
Available on request — contact us
As an authorised Volvo Penta dealer we can source parts through channels not shown online, and check supersession and used options for you
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
A genuine Volvo Penta machined adapter that joins two components with different mounting, thread, bore or connection requirements. Its length and internal geometry preserve the correct component position and flow area while the OEM sealing faces keep the joint leak-free.
🚤 Compatibility
- Engine Family: D, TAD, TWD
Full model list at the end of this description.
⚙️ Key Features
- Genuine Volvo Penta Adapter - part number 20862692
- Application-specific male/female thread or flange interface
- Machined shoulders control installed depth and alignment
- Internal bore maintains the required flow or sensor access
- Correct sealing face for the specified O-ring, washer or gasket
- Resists engine vibration and operating temperature
- Must match both connected components and the engine serial-number configuration
- Engine type: D5/D7-series Volvo Penta industrial diesel applications
🔌 Function
The adapter converts the original engine interface to the exact connection required by the adjoining component. It also locates that component at the designed depth and orientation, which can be critical to sealing, flow or sensor performance.
⚠️ Common Signs of Failure
- Leakage at either adapter interface
- Damaged or crossed threads
- Incorrect installed depth or component alignment
- Restriction caused by an incorrect internal bore
- Cracking or loosening under vibration
🛠️ Service Notes
- Check the adapter against both of the parts it has to join before fitting — adapters are specific to an engine and its variant, and one that is close but not correct will not seat or seal properly
- Clean and inspect both mating faces or connector ends; grit, old sealant or corrosion on one side is the usual reason an adapted joint leaks or works intermittently
- Renew any O-ring, gasket or sealing washer belonging to the joint rather than reusing the old one, and lubricate rubber seals lightly so they slide into place instead of rolling or nipping
- Tighten threaded adapters to the figure given in the workshop manual for that connection; many go into aluminium or onto a soft seat and will distort if pulled up hard
- Where the adapter is a workshop tool, check it for thread wear and damage before use and never modify it to make something fit
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 20862692 → Supersedes 20591747
OEM / Related Numbers
- 20591747 earlier number superseded by this part
Other-Brand OEM Numbers
- VOE20862692
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
🔎 Full Model Compatibility
Typically suits:
- Volvo Penta D13C4-B MH, D13C1-B MH, D13C2-B MP, D13B-E MG, D13B-E MG (FE), D13B-F MG, D13B-F MG (FE), D13B-N MH, D13B-N MH (FE), D13C4-B MP, D13C5-B MP, D13C1-B MG, D13C3-B MG, D13C2-B MG, D13C4-B MG, D13C7-B MP, D13C8-B MP
- Volvo Penta D11C1-A MP, D11C3-A MP, D11C2-A MP, D11C4-A MP, D11B3-A MP, D11B4-A MP, D11A-C, D11A-E, D11B2-A MP, D11A-C MP, D11A-D MP, D11A-E MP, D11A-C (IPS), D11B1-A MP
- Volvo Penta D9A2J, D9A2G, D9A2L MH, D9A2D, D9A2B, D9A2F, D9A2K, D9A2H, D9A2M MP, D9A2A, D9A2C, D9A2E
- Volvo Penta D16C1-E MG, D16C1-F MG, D16C2-E MG, D16C2-F MG, D16C1-E MH, D16C1-F MH, D16C2-E MH, D16C2-F MH
- Volvo Penta TAD1640-42GE-B, TAD1640VE-B, TAD1640-42VE-C
- Volvo Penta TAD1341-43GE-B, TAD1341VE
- Volvo Penta TAD1344-45GE-B, TAD1344VE
- Volvo Penta TAD940GE, TAD940VE
- Volvo Penta TAD941VE, TAD941GE
- Volvo Penta TAD1140-42VE
- Volvo Penta TAD1150-52VE
- Volvo Penta TAD1170-72VE
- Volvo Penta TAD1180-83VE
- Volvo Penta TAD1340VE
- Volvo Penta TAD1342VE
- Volvo Penta TAD1343VE
- Volvo Penta TAD1345VE
- Volvo Penta TAD1346GE
- Volvo Penta TAD1350VE
- Volvo Penta TAD1371-75VE
- Volvo Penta TAD1641VE-B
- Volvo Penta TAD1642VE-B
- Volvo Penta TAD1643VE-B
- Volvo Penta TAD1660-62VE
- Volvo Penta TAD1662VE EU5
- Volvo Penta TAD1670-72VE
- Volvo Penta TAD942VE
- Volvo Penta TAD943VE
- Volvo Penta TAD950VE
- Volvo Penta TAD951VE
- Volvo Penta TAD952VE
- Volvo Penta TWD1644-45GE
- Volvo Penta TWD1672-1673GE
- Volvo Penta TWD1682-83GE
- Volvo Penta TWD1683GE-B
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
