20941211 Connector | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta connector, part number 20941211, listed in the Cooling System group for the TAD1140-42VE, TAD1150-52VE, TAD1170-72VE and TAD1180-83VE industrial engines. It joins the system at its designated position and carries the seal and alignment the joint depends on.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD1180-83VE
• Volvo Penta TAD1170-72VE
• Volvo Penta TAD1150-52VE
• Volvo Penta TAD1140-42VE

• Engine Family: TAD
• HP Range: Approximately 340 HP
• Year Range: Approximately 2000s–2010s

⚙️ Key Features

• OEM Volvo Penta part number 20941211
• 0.018 kg
• Listed for 4 TAD applications

🔌 Function

Joins two sections of the system at the designed point, holding them in alignment and maintaining the seal at the joint.

⚠️ Common Signs of Failure

• Leakage, weeping or staining at the connector joint
• Seal or O-ring perished, flattened or missing
• Connector cracked, distorted or corroded
• Joint loose or working apart in service
• Mating faces scored, pitted or contaminated

🛠️ Service Notes

• Compare the new connector against the old one for size, form and number of ways before fitting; connectors that look alike are frequently not interchangeable
• Renew any seal, gasket or O-ring that belongs with the connector rather than reusing the old one, and check the mating faces are clean, dry and undamaged
• Support the connector and the line or harness running into it so the joint carries no weight or side load, and keep the original routing and clips clear of hot and moving parts
• Push or thread the connector fully home until it seats or locks, then confirm the lock has engaged rather than assuming it has
• Prove the joint before closing up the access — check it for leaks or for correct operation, whichever applies to that position, with the engine run up

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging