21004700 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Structural mounting or retaining component used in the common-rail d5/d7 cylinder-head, valve-cover or intake-control assembly. It maintains the original component position, alignment and load path.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD734GE
• Volvo Penta TAD752GE
• Volvo Penta TAD753GE
• Volvo Penta TAD754GE
• Volvo Penta TAD765VE
• Volvo Penta TAD764VE
• Volvo Penta TAD763VE
• Volvo Penta TAD762VE
• Volvo Penta TAD761VE

• Engine Family: TAD
• HP Range: Approximately 320 HP
• Year Range: Approximately 2000s-2010s

⚙️ Key Features

• Bracket, 0.010 kg
• Listed for 9 TAD-series applications
• For the cylinder-head, valve-cover and intake-control area of common-rail D5 and D7 engines

🔌 Function

Holds a small component, pipe or harness branch in position on the cylinder head area.

⚠️ Common Signs of Failure

• Item it holds found loose or rubbing
• Bracket bent so the mounted part sits out of place
• Fixing hole pulled, or the bracket cracked at a fold
• Chafe marks on the pipe or harness it should support

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging