21010337 Piston Ring Kit | Genuine Volvo Penta Part
21010337 Piston Ring Kit | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
A genuine Volvo Penta standard-size piston ring set for one piston in selected 16.1-litre D16 diesel engines. The matched compression and oil-control rings restore combustion sealing, oil control and heat transfer after piston or cylinder-liner service.
🚤 Compatibility
Typically suits:
- Volvo Penta TAD1650VE
- Engine Family: TAD
- Year Range: Approximately early 2000s onward
⚙️ Key Features
- Genuine Volvo Penta standard-size ring set
- 144mm nominal cylinder bore
- One kit services one piston
- Designed for D16 combustion pressures and liner finish
- Engine type: Volvo Penta D16 16.1-litre inline 6-cylinder diesel
📋 Kit Contents
- 1 x complete piston ring set for one piston - Volvo Penta 21010337
- 1 x top compression ring - supplied only within kit 21010337
- 1 x second compression ring - supplied only within kit 21010337
- 1 x oil-control ring assembly - supplied only within kit 21010337
🔌 Function
The rings seal combustion pressure above the piston, regulate the lubricating-oil film on the cylinder wall and conduct piston heat into the liner.
⚠️ Common Signs of Failure
- Low compression or excessive crankcase blow-by
- High engine-oil consumption
- Blue exhaust smoke
- Poor starting or reduced power
- Ring lands, piston or liner are being renewed during overhaul
🛠️ Service Notes
- Check the end gap of each ring in the bore it will run in and compare it with the figure in the workshop manual for your engine; a worn or rebored cylinder changes it
- Fit the rings the right way up — where a face is marked or the section is stepped, that face goes towards the piston crown, and an oil control ring's expander must be fitted without overlapping its own ends
- Use a ring expander rather than levering rings on with a screwdriver, and open them only as far as they need to go; cast rings snap and the groove edges nick easily
- Stagger the ring gaps round the piston as the manual for your engine directs, so that no two gaps line up
- Oil the rings, bore and compressor lightly, enter the bore with a ring compressor, and never force the piston in — if it resists, back it out and find out why
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 21010337 cross-references earlier Volvo number 20520658 where specified
OEM / Related Numbers
- 20520658 related reference
- 3589667 related piston / liner component
- 3886753 related piston / liner component
- 8131233 related piston grade references
- 8131234 related piston grade references
- 8131235 related piston grade references
Other-Brand OEM Numbers
- Mahle: 038 90 N0
- Kolbenschmidt: 800117910000
- Kolbenschmidt: 7060275002
Aftermarket / Verified Equivalents
- NE: 120059003400
- DT Spare Parts: 2.90126
- Sampa: 038.314
- SRP: PRK-10337
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
