21090006 Pipe | Genuine Volvo Penta Part

🔧 Product Description

Brand-new genuine Volvo Penta formed pipe used in the inlet and exhaust-system installation on TAD650VE, TAD660VE, TAD750VE and TAD760VE engines. The pipe connects through a hollow screw and sealing rings and must retain its original routing to avoid vibration fatigue and leakage.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD650VE
• Volvo Penta TAD660VE
• Volvo Penta TAD750VE
• Volvo Penta TAD760VE

• Engine Family: TAD

⚙️ Key Features

• Factory-formed rigid pipe for the inlet/exhaust assembly
• Banjo-style connection uses hollow screw 888767
• Sealed by rings 20971248 at the connection
• Correct bends maintain clearance from hot and moving components
• Pipe only; hose, sealing rings and hollow screw are separate
• Engine type: Volvo Penta turbocharged inline six-cylinder industrial diesel

🔌 Function

Carries the specified pressure or drain flow through the inlet/exhaust assembly while maintaining a rigid, heat-resistant route.

⚠️ Common Signs of Failure

• Leakage at the banjo connection
• Cracked pipe from vibration fatigue
• Chafing or heat damage along the routed section
• Restricted flow caused by a kink or carbon/oil contamination
• Damaged sealing faces causing repeated leakage

🛠️ Service Notes

• Offer the pipe up and check it reaches both connections freely before you tighten anything — a rigid pipe pulled into place is a pipe left under permanent strain, and strained pipes crack at the fittings in service
• Renew the sealing washers, O-rings or union seals that go with the pipe rather than reusing the old ones, and make sure the seats, faces and threads are clean
• Keep the ends capped while you work and blow or flush a pipe through before fitting; anything left inside goes straight into the oil, fuel or coolant system
• Tighten unions and banjo bolts evenly to the figures in the workshop manual for your engine — overtightening distorts the seat and starts the leak you were trying to cure
• Refit every clip and support bracket in its original place and keep the pipe clear of hot or moving parts so it cannot chafe or be shaken to failure

🔄 Supersession & Cross Reference

OEM / Related Numbers

• Hollow screw 888767
• Sealing ring 20971248
• Associated hose 21090005 / 21269134

Other-Brand OEM Numbers

• VOE21090006

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging