21104728 Bracket | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta lubricating-system bracket used on D13 marine and TAD13 industrial engines. The bracket supports an oil-system component, pipe or sump-mounted fitting in the correct position so vibration is not transferred into a rigid line or sealed connection. Its formed offset and hole pattern follow the engine-specific oil-pan and lubrication parts list for your engine.

🚤 Compatibility

• Engine Family: D, TAD

Full model list at the end of this description.

⚙️ Key Features

• Purpose-built support bracket for the D13/TAD13 lubricating system
• Maintains pipe or component alignment relative to the oil pan and crankcase
• Reduces vibration stress at oil-line connections
• OEM formed offset provides clearance from surrounding engine components
• Must be installed in the original orientation with specified fasteners
• Engine type: 13-litre inline-six marine or industrial diesel lubricating system

🔌 Function

Supports and locates the associated lubricating-system component so its fittings remain aligned and isolated from engine vibration.

⚠️ Common Signs of Failure

• Cracked bracket around a mounting hole or bend
• Oil pipe or hose rubbing against adjacent components
• Repeated oil-line fracture or fitting leakage
• Rattling or visible movement of the supported component
• Misalignment preventing the adjoining connection from seating squarely

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

Other-Brand OEM Numbers

• VOE21104728

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D13C1-A MP, D13C2-A MP, D13C3-A MP, D13C4-A MP, D13B-A MP, D13B-H MP, D13B-G MP, D13B-L MP, D13B-E MH, D13B-E MH (FE), D13B-K MP, D13B-N MH, D13B-N MH (FE), D13B-B MP, D13B-D MP, D13B-J MP, D13B-M MP, D13B-C MP, D13C6-A MP, D13C1-A MH, D13C2-A MH, D13C5-A MP
• Volvo Penta TAD1381-85VE
• Volvo Penta TAD1384-85VE-IWP