Skip to product information
1 of 2

21105100 Intermediate Housing | Genuine Volvo Penta Part

21105100 Intermediate Housing | Genuine Volvo Penta Part

Regular price $277.12 AUD
Regular price Sale price $277.12 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

In stock — Australian warehouse

Typically reaches our store in 3–5 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

A genuine Volvo Penta intermediate housing used between the cylinder block/crankcase and adjoining lubrication-system or oil-pan components on D9, D13 and D16 engine families. The housing provides machined mounting faces, structural spacing and sealed oil passages. It supersedes earlier housing 20540340 and must be matched to the engine block, sump and gasket arrangement.

🚤 Compatibility

  • Engine Family: D, TAD, TWD

Full model list at the end of this description.

⚙️ Key Features

  • Structural intermediate housing within the crankcase/lubrication assembly
  • Machined faces align the engine block with the adjoining sump or accessory housing
  • Internal passages route or contain lubricating oil
  • Provides threaded mounting points and controlled component spacing
  • Current service housing superseding 20540340
  • Engine type: Heavy-duty inline-six marine, generator and industrial diesel

🔌 Function

Joins and accurately spaces major lower-engine components while maintaining structural alignment and sealed lubricating-oil passages.

⚠️ Common Signs of Failure

  • Oil leakage along a housing joint
  • Cracking around mounting bosses or threaded holes
  • Distorted sealing face causing repeated gasket failure
  • Misalignment between sump, block or adjoining housing
  • Damaged internal oil passage or corrosion around a sealing land

🛠️ Service Notes

  • Clean both mating faces completely and check them for flatness, burrs, corrosion and old sealant; an intermediate housing seals two assemblies at once and both faces have to be right
  • Check the bearing bores and any seal running surfaces in the housing for wear and scoring, and renew seals and bearings while the housing is off
  • Fit new gaskets, seals and O-rings, and use sealant only where the manual calls for it and only as thinly as it specifies
  • Locate the housing on its dowels so it sits square before the fasteners are pulled down, then tighten evenly in stages to the figures given in the workshop manual for your unit
  • Check that shafts turn freely and that oil passages line up before final assembly, and check for leaks after the first period of running

🔄 Supersession & Cross Reference

OEM Supersession Chain

  • 21105100 → Supersedes 20540340

OEM / Related Numbers

  • 20540340 earlier number superseded by this part

Other-Brand OEM Numbers

  • VOE21105100

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta D13C4-B MH, D13C1-B MH, D13C2-B MP, D13C1-A MP, D13C2-A MP, D13C3-A MP, D13C4-A MP, D13B-A MP, D13B-H MP, D13B-G MP, D13B-L MP, D13B-E MG, D13B-E MG (FE), D13B-F MG, D13B-F MG (FE), D13B-K MP, D13B-N MH, D13B-N MH (FE), D13B-B MP, D13B-D MP, D13B-J MP, D13B-M MP, D13B-C MP, D13C4-B MP, D13C5-B MP, D13C6-A MP, D13C1-B MG, D13C3-B MG, D13C2-B MG, D13C4-B MG, D13C5-A MP, D13C7-B MP, D13C8-B MP
  • Volvo Penta D9A2J, D9A2G, D9A2L MH, D9A2F, D9A2K, D9A2H, D9A2M MP, D9A2A, D9A2C, D9A2E
  • Volvo Penta D16C1-E MG, D16C1-F MG, D16C2-E MG, D16C2-F MG, D16C-D MH, D16C1-E MH, D16C1-F MH, D16C2-E MH, D16C2-F MH
  • Volvo Penta D11C1-A MP, D11C3-A MP, D11C2-A MP, D11C4-A MP, D11B3-A MP, D11B4-A MP, D11B2-A MP, D11B1-A MP
  • Volvo Penta TAD1640-42GE-B, TAD1640GE, TAD1640VE-B, TAD1640-42VE-C
  • Volvo Penta TAD1341-43GE-B, TAD1341VE, TAD1341GE
  • Volvo Penta TAD1344-45GE-B, TAD1344VE, TAD1344GE
  • Volvo Penta TAD1641VE-B, TAD1641GE, TAD1641VE
  • Volvo Penta TAD1642VE-B, TAD1642GE, TAD1642VE
  • Volvo Penta TAD1342VE, TAD1342GE
  • Volvo Penta TAD1343VE, TAD1343GE
  • Volvo Penta TAD1345GE, TAD1345VE
  • Volvo Penta TAD1350GE, TAD1350VE
  • Volvo Penta TAD1643VE-B, TAD1643VE
  • Volvo Penta TAD1140-42VE
  • Volvo Penta TAD1170-72VE
  • Volvo Penta TAD1340VE
  • Volvo Penta TAD1346GE
  • Volvo Penta TAD1351GE
  • Volvo Penta TAD1352GE
  • Volvo Penta TAD1353GE
  • Volvo Penta TAD1354GE
  • Volvo Penta TAD1355GE
  • Volvo Penta TAD1360-62VE
  • Volvo Penta TAD1363-65VE
  • Volvo Penta TAD1371-75VE
  • Volvo Penta TAD1650GE
  • Volvo Penta TAD1651GE
  • Volvo Penta TAD1660-62VE
  • Volvo Penta TAD1662VE EU5
  • Volvo Penta TAD1670-72VE
  • Volvo Penta TAD940VE
  • Volvo Penta TAD941VE
  • Volvo Penta TAD942VE
  • Volvo Penta TAD943VE
  • Volvo Penta TWD1643GE
  • Volvo Penta TWD1644-45GE
  • Volvo Penta TWD1652GE
  • Volvo Penta TWD1653GE
  • Volvo Penta TWD1663GE
  • Volvo Penta TWD1672-1673GE
  • Volvo Penta TWD1682-83GE
  • Volvo Penta TWD1683GE-B

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details