Skip to product information
1 of 1

21108676 Sealing Ring | Genuine Volvo Penta Part

21108676 Sealing Ring | Genuine Volvo Penta Part

Regular price $4.93 AUD
Regular price Sale price $4.93 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

In stock — Australian warehouse

Typically reaches our store in 3–5 business days

Availability checked daily with Volvo Penta

βœ“ Authorised Volvo Penta Dealer Β· Genuine Volvo Penta parts Β· Ships Australia-wide

πŸ”§ Product Description

Brand-new genuine Volvo Penta sealing ring for the common-rail fuel leak-off/return line on TAD5 and TAD7 engines. It seals the pipe union against diesel leakage and air entry and should be renewed whenever the joint is disturbed.

🚀 Compatibility

Typically suits:

  • Volvo Penta TAD550GE
  • Volvo Penta TAD551GE
  • Volvo Penta TAD560VE
  • Volvo Penta TAD561VE
  • Volvo Penta TAD734GE
  • Volvo Penta TAD750GE
  • Volvo Penta TAD751GE
  • Volvo Penta TAD752GE
  • Volvo Penta TAD753GE
  • Volvo Penta TAD754GE
  • Volvo Penta TAD765VE
  • Volvo Penta TAD764VE
  • Volvo Penta TAD763VE
  • Volvo Penta TAD762VE
  • Volvo Penta TAD761VE
  • Engine Family: TAD

βš™οΈ Key Features

  • Fuel-compatible seal for the injector leak-off circuit
  • Used with return/leak-off pipe 21156370 on applicable engines
  • Correct section for the machined fuel connection
  • Single-use service item
  • One sealing ring supplied
  • Engine type: Volvo Penta 5- and 7-litre common-rail industrial diesel
  • Quantity varies by assembly, most commonly four

πŸ”Œ Function

Seals the low-pressure injector return connection so fuel remains contained and the return circuit cannot draw air.

⚠️ Common Signs of Failure

  • Diesel wetness around the union
  • Fuel smell after shutdown
  • Hard starting after fuel-system work
  • Ring cut or flattened
  • Repeated leakage from a scratched sealing face

πŸ› οΈ Service Notes

  • Always fit a new sealing ring rather than reusing the old one β€” a ring that has been compressed once has taken a set and will not seal reliably a second time
  • Clean the groove or seat and check it for scoring, corrosion and old sealant before fitting; a mark across the sealing face will leak however good the ring is
  • Ease the ring into place without stretching, twisting or dragging it over sharp edges or threads, and check it is seated squarely all the way round before closing the joint
  • Do not add sealant or jointing compound unless the workshop manual for your engine calls for it, and tighten the joint or union to the figure given in that manual
  • Check the joint for weeping once the engine has been run up to temperature and allowed to cool, as many sealing rings only show a leak after a heat cycle

πŸ”„ Supersession & Cross Reference

OEM Supersession Chain

  • 21108676 β†’ Supersedes 21084189

OEM / Related Numbers

  • 21084189 earlier number superseded by this part
  • Earlier reference 21022796
  • Leak-off line 21156370

Other-Brand OEM Numbers

  • VOE21108676

πŸ“¦ Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

Shipping & Delivery

Flat-rate shipping Australia-wide β€” $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns β€” if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy β€” we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details