• 21109863 Hose | Genuine Volvo Penta Part
1 1

21109863 Hose | Genuine Volvo Penta Part

21109863 Hose | Genuine Volvo Penta Part

$334.98 AUD
$334.98 AUD
Sale Sold out
Shipping calculated at checkout.

In stock — Australian warehouse

Typically reaches our store in 3–5 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

Brand-new genuine Volvo Penta formed hose in the TAD13 turbocharger control circuit. It connects the control solenoid and rigid control pipe so regulated pressure can operate the turbocharger actuator.

🚤 Compatibility

  • Engine Family: D, TWD, TAD

Full model list at the end of this description.

⚙️ Key Features

  • Dedicated turbocharger actuator/control hose
  • Works with solenoid valve 3819161
  • Connects to control tube 20711293 / pipe 21154124
  • Pressure- and oil-mist-resistant material
  • Hose only
  • Engine type: Volvo Penta 12.8-litre electronically controlled industrial diesel

🔌 Function

Transfers regulated control pressure to the turbo actuator so boost and exhaust energy are managed by the engine control system.

⚠️ Common Signs of Failure

  • Low or excessive boost
  • Turbo actuator not moving correctly
  • Air leak or oil mist at the hose
  • Derate or turbo-control diagnostic code
  • Hose split, soft or disconnected

🛠️ Service Notes

  • Fit hoses only to clean, sound spigots — take off old rubber, scale and corrosion, and renew the spigot or pipe if it is pitted, because no clamp will seal a rough sealing face
  • Push the hose fully home so the clamp sits behind the bead or barb rather than over the end of the spigot, and fit new clamps whenever a hose is renewed
  • Let the hose follow its natural bend with no kinks and no tension on either connection, clear of hot surfaces and moving parts, with chafe protection wherever it passes a bracket, edge or bulkhead
  • Use the correct grade of hose for the duty, and clamp to the standard the installation demands — twin clamps are normal practice on seawater and fuel connections below the waterline
  • Refill, vent and run the engine, then check every joint hot and cold and recheck the clamps after the first running period as the hose beds down

🔄 Supersession & Cross Reference

OEM / Related Numbers

  • Control tube 20711293
  • Control pipe 21154124
  • Solenoid valve 3819161

Other-Brand OEM Numbers

  • VOE21109863

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta D13C4-B MH, D13C1-B MH, D13B-F MG, D13B-F MG (FE), D13B-N MH, D13B-N MH (FE), D13C2-B MG, D13C4-B MG
  • Volvo Penta TAD1341-43GE-B, TAD1341VE, TAD1341GE
  • Volvo Penta TAD1344-45GE-B, TAD1344VE, TAD1344GE
  • Volvo Penta TAD1342VE, TAD1342GE
  • Volvo Penta TAD1343VE, TAD1343GE
  • Volvo Penta TAD1345GE, TAD1345VE
  • Volvo Penta TAD1350GE, TAD1350VE
  • Volvo Penta TAD1351GE, TAD1351-53VE
  • Volvo Penta TAD1340VE
  • Volvo Penta TAD1352GE
  • Volvo Penta TAD1353GE
  • Volvo Penta TAD1354GE
  • Volvo Penta TAD1355GE
  • Volvo Penta TAD1360-62VE
  • Volvo Penta TAD1363-65VE
  • Volvo Penta TAD1371-75VE
  • Volvo Penta TWD1643GE

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details