21112497 Sealing Ring Kit | Genuine Volvo Penta Part
21112497 Sealing Ring Kit | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
A genuine Volvo Penta gasket and O-ring pack for resealing the upper housing and mating joints on 130S and 150S saildrives. The kit is used during housing separation, diaphragm-related work and major saildrive resealing.
🚤 Compatibility
- Engine Family: D, MS
- HP Range: 13-75 HP
- Year Range: Approximately 2000s onward
Full model list at the end of this description.
⚙️ Key Features
- Genuine Volvo Penta four-piece sealing kit
- All included components individually numbered
- Correct for 130S and 150S families
- Suitable for upper-housing separation
- Engine type: Volvo Penta saildrive
📋 Kit Contents
- 1 x housing gasket - Volvo Penta 3586693
- 1 x O-ring - Volvo Penta 925256
- 1 x O-ring - Volvo Penta 944364
- 1 x O-ring - Volvo Penta 976994
🔌 Function
The gasket and O-rings seal the stationary joints between saildrive housings, preventing gear-oil loss and seawater entry.
⚠️ Common Signs of Failure
- Gear oil or seawater leaks at a housing joint
- Saildrive housing has been separated
- Diaphragm service requires drive removal
- O-rings are flattened or cut
- Gasket is torn during disassembly
🛠️ Service Notes
- Use every ring the kit supplies and replace them all in one go; leaving one original ring in place is the usual reason a rebuilt unit leaks again
- Lay the kit out against the parts you remove so each ring goes to the right joint, as kits often contain rings of very similar size
- Clean each groove and seat and check it for scoring, corrosion and old sealant before the new ring goes in
- Ease each ring into place without stretching, twisting or dragging it over sharp edges or threads, and check it is seated squarely before closing the joint
- Add no sealant unless the workshop manual for your engine calls for it, and tighten the joints to the figures in that manual
🔄 Supersession & Cross Reference
OEM / Related Numbers
- 3586693 related reference
- 925256 related reference
- 944364 related reference
- 976994 related reference
Aftermarket / Verified Equivalents
- RECMAR: REC21112497
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
🔎 Full Model Compatibility
Typically suits:
- Volvo Penta 130SR-C, 130S, 130S-C, 130S-B, 130SR, 130SR-A, 130SR-B, 150S, 150S-B, 150SR, 150SR-B, 130S-D, 130SR-D, 150S-D, 150SR-D, 150S-C, 150SR-C
- Volvo Penta D2-40F, D2-55F, D2-50F, D2-75, D2-75B, D2-75C, D2-75F, D2-60F
- Volvo Penta D1-30F, D1-13F, D1-20F
- Volvo Penta MS25S-A, MS25SR-A
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
