Skip to product information
1 of 1

21123875 Sensor | Genuine Volvo Penta Part

21123875 Sensor | Genuine Volvo Penta Part

Regular price $176.73 AUD
Regular price Sale price $176.73 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

In stock — Australian warehouse

Typically reaches our store in 2–3 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

Genuine rotational-speed sensor used in the Volvo Penta DPI-A transmission and gear-housing system. It detects shaft or gear speed and sends the RPM signal to the electronic control system for monitoring and control.

🚤 Compatibility

  • Engine Family: D, IPS, DPI
  • HP Range: 150-440 HP

Full model list at the end of this description.

⚙️ Key Features

  • Exact DPI-A drive application
  • Measures transmission or drive rotational speed
  • Factory electrical connector and sensing specification
  • Supports EVC monitoring and control
  • Installed in the gear-housing sensor assembly

🔌 Function

The sensor converts rotating gear or shaft movement into an electrical RPM signal for the transmission or EVC controller.

⚠️ Common Signs of Failure

  • Missing or erratic drive RPM reading
  • Transmission or EVC warning
  • Shift-control fault
  • Intermittent signal when warm
  • Signal changes when wiring is moved

🛠️ Service Notes

  • Note how the sensor sits and how its lead is routed before removing it, and support the harness so refitting does not leave the cable strained or rubbing
  • Turn the sensor with a spanner on its hex only — never lever or twist it by the connector body or the wiring, which breaks the internal joint even when the sensor looks undamaged
  • Renew the O-ring or sealing washer where one is fitted, and do not add thread sealant unless the manual for your engine specifies it; sealant on the threads can break the earth path of a sensor that earths through its body
  • Tighten to the figure in the workshop manual for your engine — overtightening distorts the housing and shifts or destroys the sensing element
  • Make sure the connector is clean, dry and fully latched home and check the pins for corrosion and spread — a poor connector accounts for a great many faults blamed on the sensor — then run the engine and confirm the reading or warning lamp behaves sensibly before returning the boat to service

🔄 Supersession & Cross Reference

Other-Brand OEM Numbers

  • Valeo: 366138
  • Magneti Marelli: 064847217010
  • Bosch: 0 232 103 063
  • Lucas: LCS076

Aftermarket / Verified Equivalents

  • Meat & Doria: 87771
  • Meat & Doria: 87771E
  • ESEN SKV: 17SKV229
  • Meyle: 514 810 0000
  • Maxgear: 24-0256
  • SIDAT: 83.3075A2
  • Vemo: V95-72-0015
  • EPS: 1.953.607

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta D13C2-B MP, D13C2-A MP, D13C4-A MP, D13B-L MP, D13B-G MP, D13B-K MP, D13B-C MP, D13C6-A MP, D13C4-B MP, D13C5-B MP, D13C5-A MP, D13C7-B MP, D13C8-B MP
  • Volvo Penta D11C2-A MP, D11C4-A MP, D11B2-A MP, D11A-D MP, D11A-E MP
  • Volvo Penta D4-150A-G, D4-230A-G, D4-270A-G, D4-320A-G, D4-300A-G
  • Volvo Penta D6-300A-G, D6-340A-G, D6-380A-G, D6-400A-G, D6-440A-G
  • Volvo Penta IPS3-C, IPS3-A
  • Volvo Penta IPS30-E, IPS30-D
  • Volvo Penta D8A4-A MP
  • Volvo Penta DPI-A
  • Volvo Penta IPS2-B
  • Volvo Penta IPS20-E

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details