• 21145973 Cover | Genuine Volvo Penta Part
  • 21145973 Cover | Genuine Volvo Penta Part - photo 2 of 2
1 2

21145973 Cover | Genuine Volvo Penta Part

21145973 Cover | Genuine Volvo Penta Part

$144.66 AUD
$144.66 AUD
Sale Sold out
Shipping calculated at checkout.

In stock — Australian warehouse

Typically reaches our store in 3–5 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

Brand-new genuine Volvo Penta filter-housing cover used on an early/alternate TAD1140VE-TAD1142VE oil-filter arrangement. It closes the designated port in housing 15194599 or the corresponding installation and uses X-ring 993235.

🚤 Compatibility

  • Engine Family: D, TAD

Full model list at the end of this description.

⚙️ Key Features

  • Cover for the early/alternate TAD11 filter housing
  • Correct port shape and fastener arrangement
  • Uses the specified X-ring seal
  • Not interchangeable with later cover 21145974 without matching the housing
  • Cover only
  • Engine type: Volvo Penta 10.8-litre industrial diesel

🔌 Function

Closes and seals the specified oil-filter housing gallery in the matching housing version.

⚠️ Common Signs of Failure

  • Oil leakage at the X-ring
  • Wrong cover fitted to the housing version
  • Cracked cover
  • Low oil pressure after filter-housing service

🛠️ Service Notes

  • Clean both sealing faces back to clean metal and check the cover for distortion, cracks or pulled bolt holes before refitting — a warped flange will not seal even with a new gasket
  • Where the joint uses a gasket, seal or O-ring, always fit a new one and seat it dry unless the workshop manual for your engine specifies a sealant; never try to make a poor joint tight with extra sealant
  • Tighten the fasteners progressively and evenly, working out from the centre, to the figure given in the manual for your engine — pressed steel, alloy and plastic covers distort easily if pulled down hard or unevenly
  • If the cover carries a shaft seal or bearing, support it square to the shaft as it goes on so the seal lip is not nicked or rolled over
  • Check that any breather, drain or oil return passage in the cover is clear before final tightening, and look for leaks once the engine has been run up to temperature

🔄 Supersession & Cross Reference

OEM Supersession Chain

  • 21145973 → Supersedes 3812509 → Supersedes 848431

OEM / Related Numbers

  • 3812509 earlier number superseded by this part
  • 848431 earlier number superseded by this part
  • Housing 15194599
  • X-ring 993235
  • Common companion cover 21145970

Other-Brand OEM Numbers

  • VOE21145973

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta D13C3-B MH, D13C1-B MH, D13C1-A MP, D13C2-A MP, D13C3-A MP, D13C4-A MP, D13B-A MP, D13B-H MP, D13B-G MP, D13B-L MP, D13B-E MH, D13B-E MH (FE), D13B-K MP, D13B-N MH, D13B-N MH (FE), D13B-B MP, D13B-D MP, D13B-J MP, D13B-M MP, D13B-C MP, D13C6-A MP, D13C1-A MH, D13C2-A MH, D13C5-A MP
  • Volvo Penta TAD1341VE, TAD1341GE
  • Volvo Penta TAD1342VE, TAD1342GE
  • Volvo Penta TAD1343VE, TAD1343GE
  • Volvo Penta TAD1344VE, TAD1344GE
  • Volvo Penta TAD1345GE, TAD1345VE
  • Volvo Penta TAD1351GE, TAD1351-53VE
  • Volvo Penta TAD1140-42VE
  • Volvo Penta TAD1150-52VE
  • Volvo Penta TAD1170-72VE
  • Volvo Penta TAD1180-83VE
  • Volvo Penta TAD1340VE
  • Volvo Penta TAD1350GE
  • Volvo Penta TAD1352GE
  • Volvo Penta TAD1353GE
  • Volvo Penta TAD1354GE
  • Volvo Penta TAD1355GE
  • Volvo Penta TAD1360-62VE
  • Volvo Penta TAD1363-65VE
  • Volvo Penta TAD1371-75VE
  • Volvo Penta TAD1380-82GE
  • Volvo Penta TAD1381-85VE
  • Volvo Penta TAD1384-85VE-IWP

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details