21147637 Gasket | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta scr/def tank gasket used in the diesel-exhaust-fluid tank assembly on TAD1360VE, TAD1361VE and TAD1362VE engines. It isolates and seals its assigned tank support or connection position within the SCR dosing system.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD560VE
• Volvo Penta TAD561VE
• Volvo Penta TAD1660-62VE
• Volvo Penta TAD1662VE EU5
• Volvo Penta TAD765VE
• Volvo Penta TAD764VE
• Volvo Penta TAD763VE
• Volvo Penta TAD762VE
• Volvo Penta TAD761VE

• Engine Family: TAD
• HP Range: Approximately 348-428 HP

⚙️ Key Features

• Genuine Volvo Penta scr/def tank gasket
• Used in the TAD13VE SCR / diesel-exhaust-fluid tank assembly
• Resistant to the assigned fluid, temperature and vibration environment
• Maintains the designed tank support or sealing interface
• Should be renewed if hardened, crushed, torn or chemically damaged
• Engine type: Volvo Penta 12.8-litre inline-six industrial diesel with SCR aftertreatment

🔌 Function

Provides the specified resilient support or fluid-tight seal within the SCR tank assembly.

⚠️ Common Signs of Failure

• Fluid, air or exhaust seepage at the joint
• Flattening, hardening, tearing or extrusion
• Corrosion or tracking across the sealing face
• Pressure loss or contamination entering the assembly
• Repeated leakage caused by distortion or incorrect installation

🛠️ Service Notes

• Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time
• Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings
• Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes
• Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages
• Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 82295532 - associated AdBlue / DEF tank
• 21069605 - associated DEF tank reference
• 20926021 - associated filler cap
• 82269261 - associated filter
• 21115038 and 82180004 - associated supports
• 21073027 - associated plug

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging