21157344 Hollow Screw | Genuine Volvo Penta Part
21157344 Hollow Screw | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Genuine Volvo Penta hollow banjo screw used in pairs at the hot-water outlet / cab-heater connections on TAD750VE and TAD760VE engines. The drilled screw passes coolant through the banjo fitting while clamping the joint between two sealing gaskets.
🚤 Compatibility
Typically suits:
- Volvo Penta TAD750VE
- Volvo Penta TAD760VE
- Engine Family: TAD
- HP Range: Approximately 250-320 HP
⚙️ Key Features
- Genuine Volvo Penta coolant hollow screw
- Two used at the documented hot-water outlet / cab-heater connection
- Confirmed for TAD750VE and TAD760VE
- Uses gasket 947628 at the banjo joint
- Internal drilling must remain clean and unrestricted
- Engine type: Volvo Penta 7-litre inline-six industrial diesel
- 2 used per assembly
🔌 Function
Clamps the banjo connection while allowing engine coolant to flow through the drilled centre into the hot-water outlet circuit.
⚠️ Common Signs of Failure
- Coolant leakage at the banjo joint
- Blocked internal drilling and poor heater flow
- Damaged threads or rounded screw head
- Cracked banjo fitting from incorrect tightening
- Air entry or coolant loss causing overheating
🛠️ Service Notes
- Check the through-passage is clear and clean before fitting; a blocked hollow screw starves whatever it feeds
- Always fit new sealing washers, one each side of the union where the original had them, and never reuse a crushed washer
- Hold the fitting or pipe end against turning as you tighten, so the line is not twisted and the union is not pulled out of position
- Tighten to the figure in the workshop manual for your engine — these seal by crushing the washer, not by force, and over-tightening splits the head or shears the shank
- Bring the system up to working pressure and check for weeps before closing the space up
🔄 Supersession & Cross Reference
OEM / Related Numbers
- 947628 - sealing gaskets
- 20450735 - upward coolant outlet pipe
- 20817900 - side coolant connection pipe
- 20412324 - flange screws
- 947281 - connection gasket
- 20483764 - nipple
- 21066503 - elbow
- 20508662 - plug
- 21801406 - guide washer
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
