21165582 Adjusting Screw | Genuine Volvo Penta Part
21165582 Adjusting Screw | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
The internal retaining/adjusting screw for the eccentric cam inside the D13 flexible-impeller seawater pump. The cam bends the impeller vanes to create suction and discharge, so the screw must secure the cam without protruding into the rotating impeller path.
🚤 Compatibility
Typically suits:
- Volvo Penta D13C3-B MH
- Volvo Penta D13C1-B MH
- Volvo Penta D13B-E MG
- Volvo Penta D13B-E MG (FE)
- Volvo Penta D13B-E MH
- Volvo Penta D13B-E MH (FE)
- Volvo Penta D13B-N MH
- Volvo Penta D13B-N MH (FE)
- Volvo Penta D13C1-A MH
- Volvo Penta D13C1-B MG
- Volvo Penta D13C3-B MG
- Volvo Penta D13C1-A MG
- Engine Family: D
⚙️ Key Features
- Internal seawater-pump cam screw
- Works with cam 21165572
- Corrosion-resistant for seawater exposure
- Head and thread clear the rotating impeller
- Included in documented D13 seawater-pump wear-part sets
- Engine type: D13 seawater-pump assembly
🔌 Function
Secures and positions the pump cam that compresses the flexible impeller vanes and creates pumping action.
⚠️ Common Signs of Failure
- Loss of alignment or retention
- Abnormal noise, vibration or movement
- Leakage or damage at adjoining parts
🛠️ Service Notes
- Note and record the existing setting before disturbing anything, so you have a reference to return to if needed
- Release the lock nut fully before turning the screw, then reset the lock nut and re-check the setting — tightening the lock nut usually moves the adjustment
- Set to the clearance or position given in the workshop manual for your engine using the correct feeler or gauge; do not judge the setting by feel
- Inspect the tip and the threads and renew any screw with a worn, mushroomed or picked-up tip, because a worn tip makes the setting drift in service
- Never use an adjusting screw to force a component into position, and carry out a hot re-check after running if the manual for your engine calls for one
🔄 Supersession & Cross Reference
OEM / Related Numbers
- 21347696 - seawater-pump wear-part set references
- 23537699 - seawater-pump wear-part set references
- 21165572 - cam
- 3830663 - impeller references
- 3830459 - impeller references
- 21633538 - pump body
- 3829315 - shaft seal
- 925259 - O-ring
- 21541791 - end cover
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
