• 21168465 Pulley | Genuine Volvo Penta Part
  • 21168465 Pulley | Genuine Volvo Penta Part - photo 2 of 2
1 2

21168465 Pulley | Genuine Volvo Penta Part

21168465 Pulley | Genuine Volvo Penta Part

$2,307.60 AUD
$2,307.60 AUD
Sale Sold out
Shipping calculated at checkout.

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

A crankshaft-mounted accessory pulley for TAD1380GE, TAD1381GE and TAD1382GE. Its groove diameter and offset set belt speed and alignment relative to the vibration damper and adapter stack.

🚤 Compatibility

Typically suits:

  • Volvo Penta TAD1380-82GE
  • Volvo Penta TAD1381-85VE
  • Volvo Penta TAD1384-85VE-IWP
  • Engine Family: TAD

⚙️ Key Features

  • Confirmed TAD1380GE-TAD1382GE crankshaft pulley
  • Machined grooves maintain belt tracking
  • Pulley diameter establishes the designed accessory ratio
  • Precision pilot controls radial runout
  • Works with the specified vibration-damper and adapter stack
  • Engine type: TAD13 crankshaft and accessory-drive system

🔌 Function

Transfers crankshaft rotation to the front accessory belt drive at the specified speed ratio.

⚠️ Common Signs of Failure

  • Abnormal torsional or belt-drive vibration
  • Cracks, rubber separation or movement between sections
  • Pulley runout or belt-tracking problems
  • Knocking or rattling near the crankshaft nose
  • Repeated accessory, gear or crankshaft-fastener failures

🛠️ Service Notes

  • Inspect the belt running surfaces before fitting — a pulley with glazed, scored, pitted or rust-roughened grooves will chew through a new belt in very little running time
  • Check that the pulley runs true and that its bearing or bush turns smoothly with no roughness or side play; fit a new belt whenever a pulley is changed
  • Confirm that every pulley in the drive lies in the same plane and that the belt profile matches each groove — misalignment shows up as belt dust, squeal or a worn belt edge and will destroy a new belt quickly
  • Fit onto a clean, dry, burr-free shaft or hub face and tighten the retaining fasteners in the sequence and to the figures given in the workshop manual for your engine
  • Turn the engine over by hand before starting to confirm the belt is fully seated in every groove and that nothing fouls, then recheck belt tension after the first running period

🔄 Supersession & Cross Reference

OEM / Related Numbers

  • 23291442 - crankshaft
  • 20792248 - vibration damper
  • 20799474 - alternate pulley references
  • 3829173 - alternate pulley references
  • 22451391 - damper references
  • 3889367 - damper references
  • 3888113 - adapter

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details