21183995 Support Rubber | Genuine Volvo Penta Part

🔧 Product Description

Brand-new genuine Volvo Penta rubber support used in the lubricating-system and remote oil-filter installation. The elastomer cushions the housing or oil-line support point and prevents engine vibration from being transmitted directly into the fittings.

⚙️ Key Features

• Vibration-isolating oil-system support
• Oil- and heat-resistant elastomer
• Protects remote filter and hose connections
• Factory thickness and compression rate
• One rubber support supplied
• Engine type: Volvo Penta 10.8-litre inline six-cylinder industrial diesel

🔌 Function

Elastically supports the lubricating-system component while allowing controlled movement without stressing the oil connections.

⚠️ Common Signs of Failure

• Rubber cracked, compressed or oil-softened
• Filter housing vibrating at idle
• Oil-line fatigue
• Metal-to-metal contact
• Component sagging from a collapsed support

🛠️ Service Notes

• Fit the rubber clean and dry and keep oil, fuel and solvents off it; petroleum products swell and soften rubber and shorten the life of the mounting
• Renew the whole set together — one new rubber alongside sagged old ones throws the load and the alignment out
• Let the unit settle onto the rubbers before final tightening and tighten to the figure in the workshop manual for your engine; crushing a support rubber down hard destroys the isolation it exists to provide
• Check alignment and clearance after fitting and confirm that nothing which was free to move before is now touching a fixed surface
• Inspect at each service for splitting, perishing, separation from the metal and permanent sag, and replace on condition rather than waiting for a failure

🔄 Supersession & Cross Reference

Other-Brand OEM Numbers

• VOE21183995

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging