21184843 Hose Clamp | Genuine Volvo Penta Part

🔧 Product Description

Genuine hose clamp used in the inlet and exhaust system of the Volvo Penta TAD560VE industrial diesel engine. It provides the specified clamping range and load for the original hose connection.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD560VE
• Volvo Penta TAD561VE
• Volvo Penta TAD734GE
• Volvo Penta TAD750GE
• Volvo Penta TAD751GE
• Volvo Penta TAD752GE
• Volvo Penta TAD753GE
• Volvo Penta TAD754GE
• Volvo Penta TAD765VE
• Volvo Penta TAD764VE
• Volvo Penta TAD763VE
• Volvo Penta TAD762VE
• Volvo Penta TAD761VE

• Engine Family: TAD

⚙️ Key Features

• Confirmed TAD560VE inlet-system application
• Correct OEM clamping range
• Maintains an airtight hose connection
• Resistant to heat and vibration
• Designed for the original hose and pipe diameters

🔌 Function

The clamp compresses the hose around its mating pipe to prevent air leakage and hose movement.

⚠️ Common Signs of Failure

• Boost or intake-air leakage
• Hose movement at the joint
• Clamp distortion or cracked band
• Damaged screw mechanism
• Black smoke or reduced power caused by an intake leak

🛠️ Service Notes

• Match the clamp to the hose outside diameter so the band closes well within its working range rather than at the very end of its travel
• Position it over the spigot behind the bead or barb, with the screw where a driver or spanner can still reach it once everything is refitted
• Tighten to seal, not to crush — an over-tightened worm-drive clamp cuts into soft hose and starts the leak you were trying to stop
• Renew clamps when a hose is changed rather than reusing them, and keep band, housing and screw all marine-grade stainless so the clamp does not corrode against itself
• Where two clamps are fitted to one connection, stagger the screw heads and recheck both after the first running period

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging