21195197 Pipe | Genuine Volvo Penta Part
21195197 Pipe | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Genuine Volvo Penta rigid pressure-oil pipe supplying lubricating oil to the turbocharger on D2-60F and D2-75 engine variants. It supersedes pipe 3584106 and uses dedicated sealing washers and banjo hardware to prevent oil loss at the turbocharger bearings.
🚤 Compatibility
Typically suits:
- Volvo Penta D2-75F
- Volvo Penta D2-60F
- Engine Family: D
- HP Range: 60-75 HP
⚙️ Key Features
- Genuine Volvo Penta turbocharger oil-feed pipe
- Supersedes earlier pipe 3584106
- Confirmed D2-60F and D2-75-family fitment
- Precision formed for correct turbo and block alignment
- Renew sealing gaskets whenever disconnected
- Engine type: Volvo Penta D2 four-cylinder turbocharged marine diesel
🔌 Function
Delivers pressurised engine oil to the turbocharger bearing housing for lubrication and cooling.
⚠️ Common Signs of Failure
- Oil seepage at banjo unions or pipe flare
- Low turbocharger oil supply
- Kinked, cracked or vibration-fatigued pipe
- Blue smoke or turbo bearing damage caused by oil starvation
- Oil spray or burning-oil smell near the exhaust
🛠️ Service Notes
- Offer the pipe up and check it reaches both connections freely before you tighten anything — a rigid pipe pulled into place is a pipe left under permanent strain, and strained pipes crack at the fittings in service
- Renew the sealing washers, O-rings or union seals that go with the pipe rather than reusing the old ones, and make sure the seats, faces and threads are clean
- Keep the ends capped while you work and blow or flush a pipe through before fitting; anything left inside goes straight into the oil, fuel or coolant system
- Tighten unions and banjo bolts evenly to the figures in the workshop manual for your engine — overtightening distorts the seat and starts the leak you were trying to cure
- Refit every clip and support bracket in its original place and keep the pipe clear of hot or moving parts so it cannot chafe or be shaken to failure
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 21195197 → Supersedes 3584106
OEM / Related Numbers
- 3584106 earlier number superseded by this part
- 21260601 - hollow screw
- 21260612 - sealing gasket
- 21260619 - retaining clamp
OEM Reman Alternatives
- 3801341 - remanufactured turbocharger
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
