21200067 Cable | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta electrical bonding cable used in DPH steering-cylinder assemblies. The cable maintains equipotential bonding between the steering hardware and drive/transom assembly to reduce stray-current corrosion and preserve the designed electrical path.

🚤 Compatibility

Typically suits:

• Volvo Penta DPH-D1
• Volvo Penta D6-330A-F
• Volvo Penta D6-370A-F
• Volvo Penta D4-260A-F
• Volvo Penta D4-300A-F
• Volvo Penta D6-300A-F
• Volvo Penta D4-225A-F
• Volvo Penta D6-300A-G
• Volvo Penta D6-340A-G
• Volvo Penta D6-380A-G
• Volvo Penta DPH-E
• Volvo Penta TSK DPH-E
• Volvo Penta D6-400A-G
• Volvo Penta D6-400A-F
• Volvo Penta DPR-D
• Volvo Penta D4-150A-G
• Volvo Penta D4-230A-G
• Volvo Penta D4-270A-G
• Volvo Penta D4-300A-G
• Volvo Penta TSK DPH-E1

• Engine Family: DPH, D, TSK, DPR
• HP Range: 150-400 HP

⚙️ Key Features

• Genuine Volvo Penta steering bonding cable
• Used in DPH-A and DPH-D1 steering-cylinder assemblies
• Marine-grade terminals and conductor
• Helps maintain corrosion-protection continuity
• Inspect terminal cleanliness and cable flexibility during drive service
• Engine type: Marine diesel sterndrive installation with DPH steering

🔌 Function

Maintains electrical bonding across steering components so corrosion-protection currents have a reliable low-resistance path.

⚠️ Common Signs of Failure

• Green corrosion or broken conductor strands
• Loose or overheated cable terminals
• High resistance measured across the bonding path
• Accelerated corrosion near steering components
• Cable insulation cracked or oil-damaged

🛠️ Service Notes

• Isolate the battery before disconnecting or reconnecting anything, and make sure connectors are clean, dry and fully latched before switching the system back on
• Route the new cable along the original path and secure it with the original clips, ties and stand-offs; unsupported cable chafes through wherever it touches a bracket, hose or edge
• Keep the run clear of the exhaust and turbocharger, away from moving parts and sharp edges, and use a grommet or gland wherever it passes through a panel or bulkhead
• Protect the connections against damp — a properly seated and sealed connector survives an engine bilge atmosphere far better than a taped joint
• Replace a damaged cable rather than patching it; where a repair is unavoidable use a crimped and sealed joint, never solder as the only mechanical connection

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 21233764 - associated chassis ground cable
• 21745119 - steering cylinder references
• 22452005 - steering cylinder references
• 21388920 - steering-cylinder bushing
• 3589516 - wear washer
• 21132674 - steering bellows kit
• 948211 - cable ties
• 993453 - mounting screws
• 984298 - mounting screws

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging