21227337 Hose | Genuine Volvo Penta Part
21227337 Hose | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
A moulded coolant hose used in the hot-water outlet and connection circuit on selected Volvo Penta D13 marine engines. It provides a flexible connection between rigid cooling-system components while maintaining the factory routing and clearance.
🚤 Compatibility
- Engine Family: D
Full model list at the end of this description.
⚙️ Key Features
- Correct moulded bends and connection diameters
- Resistant to coolant, heat and vibration
- Suitable for propulsion and generating-set installations
- Direct replacement where part number 21227337 is specified
- Engine type: D13 inline-six turbocharged marine diesel
🔌 Function
Carries engine coolant through the hot-water outlet circuit while accommodating engine vibration and thermal expansion.
⚠️ Common Signs of Failure
- Coolant seepage at the hose ends
- Cracking, swelling or hardening
- Dried coolant staining
- Progressive coolant loss
- Engine overheating or reduced cabin-heater output
🛠️ Service Notes
- Fit hoses only to clean, sound spigots — take off old rubber, scale and corrosion, and renew the spigot or pipe if it is pitted, because no clamp will seal a rough sealing face
- Push the hose fully home so the clamp sits behind the bead or barb rather than over the end of the spigot, and fit new clamps whenever a hose is renewed
- Let the hose follow its natural bend with no kinks and no tension on either connection, clear of hot surfaces and moving parts, with chafe protection wherever it passes a bracket, edge or bulkhead
- Use the correct grade of hose for the duty, and clamp to the standard the installation demands — twin clamps are normal practice on seawater and fuel connections below the waterline
- Refill, vent and run the engine, then check every joint hot and cold and recheck the clamps after the first running period as the hose beds down
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
🔎 Full Model Compatibility
Typically suits:
- Volvo Penta D13C2-B MP, D13C1-A MP, D13C2-A MP, D13C3-A MP, D13C4-A MP, D13B-A MP, D13B-C MH, D13B-H MP, D13B-G MP, D13B-L MP, D13B-E MG, D13B-E MG (FE), D13B-E MH, D13B-E MH (FE), D13B-K MP, D13B-N MH, D13B-N MH (FE), D13B-B MP, D13B-D MP, D13B-J MP, D13B-M MP, D13B-C MP, D13C4-B MP, D13C6-A MP, D13C1-A MH, D13C5-B MP, D13C3-B MG, D13C5-A MP, D13C1-A MG, D13C7-B MP, D13C8-B MP, D13C9-A MP
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
