21233226 Hose | Genuine Volvo Penta Part

🔧 Product Description

A flexible service hose used in a designated Volvo Penta sterndrive installation. Its moulded shape and connection dimensions are specific to the original drive or transom-shield system.

⚙️ Key Features

• Factory-specified diameter and formed routing
• Accommodates steering and drive movement
• Resistant to the applicable marine fluid and environment
• Direct replacement where part number 21233226 is specified
• Engine type: Volvo Penta sterndrive

🔌 Function

Provides a flexible sealed connection within the sterndrive, steering or transom-shield system.

⚠️ Common Signs of Failure

• Cracks or chafing
• Fluid or water leakage
• Hose swelling or hardening
• Restricted movement of the drive
• Kinking or internal collapse

🛠️ Service Notes

• Fit hoses only to clean, sound spigots — take off old rubber, scale and corrosion, and renew the spigot or pipe if it is pitted, because no clamp will seal a rough sealing face
• Push the hose fully home so the clamp sits behind the bead or barb rather than over the end of the spigot, and fit new clamps whenever a hose is renewed
• Let the hose follow its natural bend with no kinks and no tension on either connection, clear of hot surfaces and moving parts, with chafe protection wherever it passes a bracket, edge or bulkhead
• Use the correct grade of hose for the duty, and clamp to the standard the installation demands — twin clamps are normal practice on seawater and fuel connections below the waterline
• Refill, vent and run the engine, then check every joint hot and cold and recheck the clamps after the first running period as the hose beds down

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging