Skip to product information
1 of 1

21285163 Temperature Sensor | Genuine Volvo Penta Part

21285163 Temperature Sensor | Genuine Volvo Penta Part

Regular price $299.43 AUD
Regular price Sale price $299.43 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

In stock — Australian warehouse

Typically reaches our store in 2–3 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

A high-temperature sensor used to monitor exhaust-gas temperature within selected Volvo Penta SCR muffler and aftertreatment systems. Its signal allows the engine-management system to control emissions functions and protect the exhaust components from excessive temperature.

🚤 Compatibility

  • Engine Family: TAD, D, TWD, TADH

Full model list at the end of this description.

⚙️ Key Features

  • Designed for SCR and aftertreatment monitoring
  • High-temperature probe and sealed electrical connection
  • Provides input to the engine and emissions control system
  • Engine type: Turbocharged diesel with SCR exhaust aftertreatment

🔌 Function

Measures exhaust temperature and sends the value to the engine-control system for emissions management and component protection.

⚠️ Common Signs of Failure

  • SCR or aftertreatment warning message
  • Implausible exhaust-temperature reading
  • Engine derate or reduced power
  • Increased emissions or failed regeneration strategy
  • Open-circuit, short-circuit or sensor-range diagnostic code

🛠️ Service Notes

  • Check the replacement is the sensor specified for your engine and instrumentation — sensors sharing a thread can have quite different characteristics, and a mismatch gives plausible but wrong readings
  • Let the engine cool and depressurise the system before removing a sensor from a coolant or oil passage, and be ready for the fluid that will come out
  • Clean the threads and sealing face in the housing, fit a new sealing washer or O-ring where one is used, and do not pack the threads with sealant on a sensor that earths through its body
  • Tighten to the figure in the workshop manual with a spanner on the hexagon only — these bodies crack easily and the thread in an alloy housing is easily stripped
  • Reconnect the plug or terminal clean and secure, route the lead clear of hot and moving parts, then top up, bleed and run the engine and check the reading is sensible and steady while watching the joint for weeps

🔄 Supersession & Cross Reference

Aftermarket / Verified Equivalents

  • DT Spare Parts: 2.27219
  • Bosch: 0 986 259 122
  • Bosch: 0 986 259 128
  • Hella: 6PT 358 181-801
  • NRF: 707008
  • Meat & Doria: 12526
  • Sampa: 096.2452
  • Febi Bilstein: 102013
  • Febi Bilstein: 102014
  • Meyle: 534 800 0018
  • Auger: 96158
  • Pierburg: 7.12441.10.0
  • Trucktec Automotive: 03.17.046

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta D13C1-A MH, D13C2-A MH, D13C3-B MG, D13C4-B MG, D13C5-A MP, D13C2-A MG, D13C1-A MG
  • Volvo Penta TAD840GE, TAD840-43VE, TAD840GE-B
  • Volvo Penta TAD570-72VE, TAD570-71VE-B
  • Volvo Penta TAD880-82GE, TAD880-84VE
  • Volvo Penta TADH880-82GE, TADH880-84VE
  • Volvo Penta TAD1140-42VE
  • Volvo Penta TAD1150-52VE
  • Volvo Penta TAD1170-72VE
  • Volvo Penta TAD1180-83VE
  • Volvo Penta TAD1351-53VE
  • Volvo Penta TAD1371-75VE
  • Volvo Penta TAD1380-82GE
  • Volvo Penta TAD1381-85VE
  • Volvo Penta TAD1384-85VE-IWP
  • Volvo Penta TAD1670-72VE
  • Volvo Penta TAD540-42VE
  • Volvo Penta TAD550-51VE
  • Volvo Penta TAD552VE
  • Volvo Penta TAD580-83VE
  • Volvo Penta TAD841-43GE
  • Volvo Penta TAD850-52VE
  • Volvo Penta TAD851-53GE
  • Volvo Penta TAD853VE
  • Volvo Penta TAD870-73VE
  • Volvo Penta TWD1683VE

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details