21341234 Engine Mounting | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta engine mounting used in the D13B-E MG and D13B-E MG (FE) marine generating-set anchorage system. The mounting works with the engine frame and rubber cushion to carry engine weight, isolate vibration and preserve generator/shaft alignment under continuous operation.

🚤 Compatibility

Typically suits:

• Volvo Penta D13B-E MG
• Volvo Penta D13B-E MG (FE)
• Volvo Penta D13B-F MG
• Volvo Penta D13B-F MG (FE)
• Volvo Penta D13C2-A MH
• Volvo Penta D13C1-B MG
• Volvo Penta D13C3-B MG
• Volvo Penta D13C2-B MG
• Volvo Penta D13C4-B MG
• Volvo Penta D13C2-A MG
• Volvo Penta D13C1-A MG
• Volvo Penta D13C3-B MH
• Volvo Penta D13C1-B MH

• Engine Family: D

⚙️ Key Features

• Genuine Volvo Penta D13 generating-set mounting
• Load-bearing anchorage component
• Used with the specified frame and rubber cushion
• Controls engine position and vibration isolation
• Match generating-set frame, mounting height and engine serial number
• Engine type: Volvo Penta D13 12.8-litre inline-six marine generating-set diesel
• 2 used per assembly

🔌 Function

Supports the engine and generator assembly, isolates vibration and maintains alignment with the vessel foundation.

⚠️ Common Signs of Failure

• Excessive engine movement under load
• Vibration transmitted into the hull or frame
• Rubber separation, cracking or permanent compression
• Misalignment of the engine, shaft or transmission
• Loose, corroded or elongated mounting holes

🛠️ Service Notes

• Renew mounts as a set rather than singly, so the engine sits on rubber of matched condition and stiffness
• Take the load off the mounts with proper support before undoing anything, and keep the engine level as it is lowered onto the new ones so each foot lands flat with no gap under it
• Let the engine stand on the new mounts so the rubber can settle before setting the final alignment; aligning straight away gives a reading that changes as soon as the elastomer compresses
• Set the shaft or coupling alignment to the method and limits in the workshop manual for your engine, and check the mounts share the load rather than one being wound down hard to make the figures
• Recheck the alignment and the mount locknuts after the first period of running, and keep oil, fuel and coolant off the rubber — contamination softens and swells it

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 21507993 - associated engine-frame references
• 21342141 - associated engine-frame references
• 862347 - associated rubber cushion
• 18683 - associated U-member washer/hardware

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging