21351381 Crankshaft | Genuine Volvo Penta Part
21351381 Crankshaft | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Genuine crankshaft for Volvo Penta D4D and TAD420VE industrial diesel engines. The crankshaft belongs to a documented Volvo OEM family and has a verified Swedish Lorry Parts replacement.
🚤 Compatibility
Typically suits:
- Volvo Penta TD420VE
- Volvo Penta TAD420VE
- Engine Family: TD, TAD
- Serial Range: SN10803389-
⚙️ Key Features
- D4D and TAD420VE application
- Precision-ground main and big-end journals
- Factory oil passages and counterweight balance
- Full Volvo OEM reference family
🔌 Function
The crankshaft transfers combustion force from the pistons into rotary engine output and drives the timing and accessory systems.
⚠️ Common Signs of Failure
- Main or big-end bearing knock
- Excessive crankshaft end float
- Scored journals
- Cracks or heat discolouration
- Abnormal engine vibration
🛠️ Service Notes
- Fitting a crankshaft is a full bottom-end job — the block, bearing housings and oil ways all want checking, and the journals measuring for size, taper and ovality, before anything is assembled
- Wash out every oil way in the new shaft and blow it through; swarf or preservative left in a gallery will destroy the new bearings
- Fit new main and big-end shells and thrust washers, and check running clearance and crankshaft end float against the figures in the workshop manual for your engine rather than assuming they are right
- Oil the shells and journals on assembly, tighten the bearing caps in the sequence and to the tightening figures and angles specified for your engine, and turn the shaft by hand after each cap to confirm nothing binds
- Renew the front and rear crankshaft seals, inspect the flywheel, damper, pulley and their fasteners while the access is good, then prime the lubricating system and confirm oil pressure before the engine is run up under load
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 21351381 → Supersedes 20891184 → Supersedes 20744682 → Supersedes 20729184 → Supersedes 20555340 → Supersedes 20459150
OEM / Related Numbers
- 20891184 earlier number superseded by this part
- 20744682 earlier number superseded by this part
- 20729184 earlier number superseded by this part
- 20555340 earlier number superseded by this part
- 20459150 earlier number superseded by this part
Aftermarket / Verified Equivalents
- Swedish Lorry Parts: VAX-184
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
