21399013 Plug | Genuine Volvo Penta Part

🔧 Product Description

Threaded sealing plug used with O-ring 21286721 in specified Volvo Penta catalyst-equipped gasoline-engine exhaust manifolds and elbows. It closes its designated port while maintaining the water and exhaust separation required by the catalyst and wet-exhaust assembly.

🚤 Compatibility

• Engine Family: V
• HP Range: 225-320 HP

Full model list at the end of this description.

⚙️ Key Features

• Genuine Volvo Penta exhaust-manifold sealing plug
• Used with O-ring 21286721
• Designed for catalyst-equipped gasoline exhaust assemblies
• Correct thread, shoulder and sealing geometry
• Common illustrated quantity of four in specified assemblies
• Engine type: Volvo Penta gasoline V8 with catalytic wet-exhaust system
• 4 used per assembly

🔌 Function

Seals the designated manifold or elbow port so cooling water and exhaust gases remain within their intended passages.

⚠️ Common Signs of Failure

• Water or soot staining around the plug
• Flattened, cut or hardened O-ring
• Corroded plug or damaged threads
• Plug loosening from heat cycling or incorrect torque
• Internal or external leakage around the exhaust manifold port

🛠️ Service Notes

• Clean the threads and the seating face before fitting, and make sure the opening itself is clear of old sealant, swarf and corrosion
• Renew the sealing washer or O-ring where one is fitted rather than reusing a flattened one, and only use thread sealant where the workshop manual for your engine calls for it
• Tighten to the figure given in the workshop manual for your engine — plugs in aluminium and other soft castings strip easily, and a plug pulled up hard to cure a leak usually distorts the seat and makes it worse
• Where the plug closes an oil, fuel or coolant passage, run the engine up to temperature afterwards and check the joint under pressure before signing the job off
• Keep removed plugs paired with the holes they came out of during a strip-down — plugs of very similar appearance often differ in thread, reach or sealing type

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 21286721 - required sealing O-ring
• 21399010 - separate M27 connector/plug used elsewhere in the assembly; not interchangeable

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta 5.7GXiC-320-R, 5.7GXiCE-320-R, 5.7GXiC-J, 5.7GXiC-JF, 5.7GXiCE-JF, 5.7GXiCE-J, 5.7GXiCE-M, 5.7GXiC-P, 5.7GXiCE-P, 5.7GiCE-300-M, 5.7GiCE-300-MF, 5.7GiC-300-J, 5.7GiCE-300-J, 5.7GiCE-300-JF, 5.7GiC-300-JF, 5.7GiC-300-P, 5.7GiCE-300-P, 5.7GiC-300-R, 5.7GiCE-300-R, 5.0GiC-225-S, 5.0GiCE-225-S, 5.0GiC-J, 5.0GXiCE-JF, 5.0GXiCE-J, 5.0GXiC-JF, 5.0GXiCE-M, 5.0GXiCE-MF, 5.0GXiC-P, 5.0GXiCE-P, 5.0GXiC-270-R, 5.0GXiCE-270-R, 5.0GXiC-J
• Volvo Penta V8-270-C-B, V8-270-CE-B, V8-300-C-A, V8-300-CE-A, V8-300-C-B, V8-320-C-B, V8-320-CE-B, V8-300-CE-B, V8-320-C-A, V8-320-CE-A, V8-225-C-A, V8-225-CE-A, V8-225-C-B, V8-225-CE-B, V8-270-C-A, V8-270-CE-A