21399636 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Engine-mounted support bracket used in the electronic engine-control and ignition-component area on specified Volvo Penta 5.0-litre and 5.7-litre gasoline engines. It locates the designated electrical/control hardware and maintains the required clearance from heat, vibration and moving throttle components.

🚤 Compatibility

• Engine Family: V
• HP Range: 225-320 HP

Full model list at the end of this description.

⚙️ Key Features

• Genuine Volvo Penta electronic-control support bracket
• Used on specified catalyst and non-catalyst gasoline V8 engines
• Maintains control-component and wiring-harness alignment
• Provides correct OEM mounting-hole and clearance geometry
• Direct replacement for a cracked, bent or corroded bracket
• Engine type: Volvo Penta electronically controlled gasoline V8 marine engine

🔌 Function

Supports the designated electronic/control components and keeps wiring and throttle hardware in the correct position under vibration and engine movement.

⚠️ Common Signs of Failure

• Cracks around fastener holes or bracket bends
• Loose control component or repeated fastener movement
• Wiring chafing caused by lost bracket alignment
• Interference with throttle linkage or nearby components
• Corrosion, distortion or vibration-related fatigue

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 21399642 - adjacent throttle-cable connection bracket used in specified engine arrangements; not interchangeable

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta 5.7GXi-320-R, 5.7GXiE-320-R, 5.7GXiC-320-R, 5.7GXiC-P, 5.7GXi-P, 5.7Gi-300-P, 5.7Gi-300-R, 5.7GiE-300-R, 5.7GiC-300-P, 5.7GiC-300-R, 5.0GiC-225-S, 5.0GXiC-P, 5.0GXi-270-R, 5.0GXiC-270-R, 5.0GXi-P
• Volvo Penta V8-270-C-B, V8-300-A, V8-300-B, V8-300-C-A, V8-300-C-B, V8-320-C-B, V8-320-A, V8-320-B, V8-320-C-A, V8-225-C-A, V8-225-C-B, V8-270-A, V8-270-B, V8-270-C-A