21408944 Cooling Hose | Genuine Volvo Penta Part
21408944 Cooling Hose | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Moulded engine-coolant hose used in the turbocharger cooling circuit on specified Volvo Penta D13 marine propulsion, auxiliary and generating-set engines. It routes coolant through the water-cooled turbocharger installation and must be fitted in the correct orientation with the specified clamps.
🚤 Compatibility
- Engine Family: D
Full model list at the end of this description.
⚙️ Key Features
- Genuine Volvo Penta moulded turbocharger cooling hose
- Designed for the D13B and D13C cooling layout
- Carries engine coolant to or from the turbocharger circuit
- Correct bends prevent kinking and contact with hot exhaust components
- Engine type: Volvo Penta 12.8-litre inline six-cylinder marine diesel
🔌 Function
Circulates coolant through the turbocharger cooling connection to control bearing-housing and shutdown temperatures.
⚠️ Common Signs of Failure
- Coolant seepage around the hose or clamps
- Softening, swelling or surface cracking
- Coolant odour or unexplained coolant loss
- Localized overheating around the turbocharger
- Hose chafing or heat damage near exhaust components
🛠️ Service Notes
- Fit the hose dry onto clean, smooth stubs and push it fully onto the spigot so the clip lands behind the bead; do not use grease or sealant to help it on
- Keep the original routing and bend radius and use the correct clips, tightened evenly — a hose that is kinked, stretched or pulled to fit will fail early
- Check the stubs for corrosion, pitting and burrs while the hose is off, and clear any scale or debris out of the system
- Keep the hose away from hot surfaces and anything that can chafe it, and support long runs as they were originally clipped
- Refill, vent and run the engine to temperature, then re-check every joint and re-tighten the clips once the hose has bedded in
🔄 Supersession & Cross Reference
OEM / Related Numbers
- 21736501 - associated turbocharger
- 21514422 - associated turbocharger gasket references
- 22707542 - associated turbocharger gasket references
- 21160750 - associated pressure hose
OEM Reman Alternatives
- 3801374 - related remanufactured turbocharger references
- 3801495 - related remanufactured turbocharger references
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
🔎 Full Model Compatibility
Typically suits:
- Volvo Penta D13C3-B MH, D13C1-B MH, D13C4-B MH, D13C1-A MP, D13C3-A MP, D13B-E MG, D13B-E MG (FE), D13B-E MH, D13B-E MH (FE), D13B-F MG, D13B-F MG (FE), D13B-N MH, D13B-N MH (FE), D13B-B MP, D13B-D MP, D13B-J MP, D13B-M MP, D13C1-A MH, D13C2-A MH, D13C1-B MG, D13C3-B MG, D13C2-B MG, D13C4-B MG, D13C2-A MG, D13C1-A MG
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
