21411672 Gasket | Genuine Volvo Penta Part
21411672 Gasket | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Profiled intake-system gasket fitted between the air-shutter / throttle-valve component and connecting pipe on specified Volvo Penta TAD5 and TAD7 industrial engines. It seals the charge-air path so commanded air-shutter operation is not affected by unmetered leakage.
🚤 Compatibility
Typically suits:
- Volvo Penta TAD550GE
- Volvo Penta TAD551GE
- Volvo Penta TAD560VE
- Volvo Penta TAD561VE
- Engine Family: TAD
⚙️ Key Features
- Genuine Volvo Penta intake air-shutter gasket
- Used with air-shutter 21411668 and connecting pipe 21412940
- Maintains a sealed boosted-air connection
- Single-use service gasket for clean reassembly
- Correct profile for the specified industrial-engine intake assembly
- Engine type: Volvo Penta inline industrial diesel with electronically controlled intake shutter
🔌 Function
Seals the air-shutter flange and prevents charge-air leakage around the electronically controlled intake valve.
⚠️ Common Signs of Failure
- Hissing or oil-mist staining at the flange
- Reduced boost response
- Air-shutter or intake-control fault codes
- Gasket tearing or crushing after dismantling
- Loose fasteners caused by joint movement
🛠️ Service Notes
- Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time
- Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings
- Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes
- Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages
- Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it
🔄 Supersession & Cross Reference
OEM / Related Numbers
- 21411668 - associated throttle / air-shutter valve
- 21412940 - associated connecting pipe
- 20794356 - related inlet-manifold gasket
- 21652139 - associated inlet manifold
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
