21463420 Water Pipe | Genuine Volvo Penta Part

🔧 Product Description

A genuine rigid pipe used in the assigned Volvo Penta engine cooling-water system.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD765VE
• Volvo Penta TAD764VE
• Volvo Penta TAD763VE
• Volvo Penta TAD762VE
• Volvo Penta TAD761VE

• Engine Family: TAD

⚙️ Key Features

• Engine-specific formed routing
• Pressure- and temperature-resistant construction
• Precision hose and sealing connections
• Maintains unrestricted coolant flow
• Correct OEM mounting points

🔌 Function

The pipe carries coolant or cooling water between the designated engine, pump, heat exchanger or radiator components.

⚠️ Common Signs of Failure

• Cracked flange or mounting tab
• Internal restriction

🛠️ Service Notes

• Drain the system to below the level of the pipe before disconnecting it and catch what comes out — coolant and raw water both make a mess of a bilge
• Renew the O-rings, seals or gaskets at each joint rather than reusing them, and lubricate rubber seals with clean coolant or the lubricant the manual specifies, never with oil or grease
• Check the bore is clear and clean before fitting; scale, silt and debris carried over from the old pipe will lodge in the pump or heat exchanger
• Support the pipe on its original brackets and clips so the joints carry no strain, and keep it clear of hot surfaces and moving parts
• Refill, bleed, then run the engine and check every joint for weeping while it is warm and under pressure

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging