21471054 Bracket | Genuine Volvo Penta Part

🔧 Product Description

A small mounting bracket used to secure and align a mechanical control cable in the engine-control installation on the Volvo Penta D41B.

🚤 Compatibility

• Engine Family: DPH, D, AD, TMD, DPR, TAMD, KAMD
• HP Range: 150-400 HP

Full model list at the end of this description.

⚙️ Key Features

• Genuine Volvo Penta control-cable bracket
• Correct cable-clamp and mounting geometry
• Maintains throttle or shift cable alignment
• Prevents cable housing movement
• Direct replacement for the D41B control arrangement
• Engine type: Six-cylinder turbocharged marine diesel
• Quantity varies by assembly, most commonly one

🔌 Function

Secures the control-cable outer housing so helm movement is accurately transferred to the engine linkage.

⚠️ Common Signs of Failure

• Excessive throttle or shift free play
• Cable housing moves in the bracket
• Incomplete throttle travel
• Difficulty selecting gear
• Bent or cracked bracket

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 21471054 → Supersedes 819067 → Supersedes 836343

OEM / Related Numbers

• 819067 earlier number superseded by this part
• 836343 earlier number superseded by this part
• 819068 - related washer
• 963676 - related hex socket screw

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D4-260A-F, D4-300A-F, D4-225A-F, D4-150A-G, D4-230A-G, D4-270A-G, D4-320A-G, D4-300A-G
• Volvo Penta D6-330A-F, D6-370A-F, D6-300A-F, D6-300A-G, D6-340A-G, D6-380A-G, D6-400A-G, D6-400A-F
• Volvo Penta TAMD31L-A, TAMD31M-A, TAMD31P, TAMD31P-A, TAMD31S
• Volvo Penta TAMD41H-A, TAMD41H-B, TAMD41P-A, TAMD41P
• Volvo Penta AD31L-A, AD31P-A
• Volvo Penta AD41L-A, AD41P-A
• Volvo Penta DPH-D1, DPH-E
• Volvo Penta D41L-A
• Volvo Penta DPR-D
• Volvo Penta KAMD42P-A
• Volvo Penta TMD31L-A
• Volvo Penta TMD41L-A