21472660 Wiring Harness | Genuine Volvo Penta Part

🔧 Product Description

A dedicated fuel-system wiring harness used on selected Volvo Penta TAD1140, TAD1141 and TAD1142 industrial engines.

🚤 Compatibility

• Engine Family: TAD, TWD

Full model list at the end of this description.

⚙️ Key Features

• Genuine Volvo Penta fuel-system harness
• Connects the designated fuel-system electrical component
• Factory-moulded sealed connector
• Correct routing around fuel hoses and fittings
• Designed for TAD11 engine vibration and temperature
• Engine type: TAD11 inline-six turbocharged common-rail industrial diesel

🔌 Function

Carries power and signal wiring to the fuel-system component fitted within the associated hose and fitting assembly.

⚠️ Common Signs of Failure

• Fuel-system diagnostic code
• Intermittent engine derate
• Damaged or fuel-contaminated connector
• Broken conductors near the harness branch
• Loss of signal to the connected fuel-system component

🛠️ Service Notes

• Compare the new harness with the old one before fitting — check the connector types, the number of pins and the branch lengths, and lay it out alongside the old loom to confirm every branch reaches its component
• Disconnect the batteries before unplugging or fitting a harness, and support the loom as you work so its weight never hangs on a connector or a bulkhead grommet
• Route it along the original path and secure it with the original clips and ties, clear of hot exhaust surfaces, sharp edges and anything that moves; leave a service loop at each connector rather than pulling a branch tight
• Push every connector home until the lock latches and protect the joints with a marine dielectric grease — an intermittent electrical fault is far more often a partly seated or salt-corroded pin than a broken wire
• Renewing the harness is the right repair where insulation is chafed, brittle or oil-soaked, or where corrosion has tracked inside the connector bodies; patch repairs in a damp engine bay tend to fail again, and any single conductor that is repaired should be joined with tinned marine cable of the same gauge, a proper crimp and adhesive-lined heat-shrink

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 22314421, 22313740 and 22313735 - related fuel hoses
• 20852764 - sealing ring
• 991048 - hollow screw
• 946602 - nipple
• 969011 - gasket

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TAD1640-42GE-B, TAD1640VE-B, TAD1640-42VE-C
• Volvo Penta TAD1341-43GE-B, TAD1341VE
• Volvo Penta TAD1344-45GE-B, TAD1344VE
• Volvo Penta TAD1350GE, TAD1350VE
• Volvo Penta TAD1351GE, TAD1351-53VE
• Volvo Penta TAD1140-42VE
• Volvo Penta TAD1150-52VE
• Volvo Penta TAD1170-72VE
• Volvo Penta TAD1180-83VE
• Volvo Penta TAD1340VE
• Volvo Penta TAD1342VE
• Volvo Penta TAD1343VE
• Volvo Penta TAD1345VE
• Volvo Penta TAD1346GE
• Volvo Penta TAD1352GE
• Volvo Penta TAD1353GE
• Volvo Penta TAD1354GE
• Volvo Penta TAD1355GE
• Volvo Penta TAD1360-62VE
• Volvo Penta TAD1363-65VE
• Volvo Penta TAD1371-75VE
• Volvo Penta TAD1380-82GE
• Volvo Penta TAD1381-85VE
• Volvo Penta TAD1384-85VE-IWP
• Volvo Penta TAD1641VE-B
• Volvo Penta TAD1642VE-B
• Volvo Penta TAD1643VE-B
• Volvo Penta TAD1650VE-B/51VE
• Volvo Penta TAD1660-62VE
• Volvo Penta TAD1662VE EU5
• Volvo Penta TAD1670-72VE
• Volvo Penta TWD1683VE