21482601 Gasket | Genuine Volvo Penta Part
21482601 Gasket | Genuine Volvo Penta Part
Couldn't load pickup availability
In stock — Australian warehouse
Typically reaches our store in 3–5 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
A high-temperature exhaust-manifold gasket used on Volvo Penta D11 and related heavy-duty diesel engine families.
🚤 Compatibility
Typically suits:
- Volvo Penta TAD1180-83VE
- Volvo Penta TAD943VE
- Volvo Penta TAD952VE
- Volvo Penta TAD951VE
- Volvo Penta TAD950VE
- Volvo Penta TAD1170-72VE
- Volvo Penta TAD940GE
- Volvo Penta TAD940VE
- Volvo Penta TAD941VE
- Volvo Penta TAD941GE
- Volvo Penta TAD942VE
- Volvo Penta TAD1150-52VE
- Volvo Penta TAD1140-42VE
- Engine Family: TAD
⚙️ Key Features
- Multi-layer high-temperature sealing construction
- Correct exhaust-port profile
- Maintains a gas-tight manifold joint
- Suitable for turbocharged diesel operation
- Direct replacement for the assigned cylinder-head position
- 6 used per assembly
🔌 Function
The gasket seals combustion exhaust gas between the cylinder head and exhaust manifold.
⚠️ Common Signs of Failure
- Soot marks around the manifold
- Ticking or hissing under load
- Burnt or eroded gasket edge
- Reduced turbocharger response
- Heat damage around the leaking port
🛠️ Service Notes
- Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time
- Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings
- Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes
- Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages
- Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it
🔄 Supersession & Cross Reference
OEM / Related Numbers
- 20984451 - Related earlier gasket reference
- 21394765 - Related OEM gasket reference
Aftermarket / Verified Equivalents
- DT Spare Parts 6.23552
- SLP EPL-2601
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
