21576047 Hose | Genuine Volvo Penta Part
21576047 Hose | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Moulded cooling hose for the low-rating Volvo Penta D6-G charge-air cooler system. It carries cooling medium between the cooler, seawater pump/filter and adjoining pipework using the exact factory bend and connection diameters.
🚤 Compatibility
- Engine Family: D
- HP Range: 145-480 HP
Full model list at the end of this description.
⚙️ Key Features
- Full D6-300/340/380 A/D/I-G fitment
- Factory moulded shape
- Marine coolant/seawater-resistant material
- Correct clamp locations and end sizes
- Direct replacement for the original hose
- Engine type: 5.5-litre inline-six turbocharged marine diesel
🔌 Function
Transfers cooling medium through the charge-air cooler circuit to control intake-air temperature.
⚠️ Common Signs of Failure
- Soft, swollen or cracked hose
- Collapsed hose and overheating
- Salt staining around clamps
- Hose chafe or poor alignment
🛠️ Service Notes
- Fit hoses only to clean, sound spigots — take off old rubber, scale and corrosion, and renew the spigot or pipe if it is pitted, because no clamp will seal a rough sealing face
- Push the hose fully home so the clamp sits behind the bead or barb rather than over the end of the spigot, and fit new clamps whenever a hose is renewed
- Let the hose follow its natural bend with no kinks and no tension on either connection, clear of hot surfaces and moving parts, with chafe protection wherever it passes a bracket, edge or bulkhead
- Use the correct grade of hose for the duty, and clamp to the standard the installation demands — twin clamps are normal practice on seawater and fuel connections below the waterline
- Refill, vent and run the engine, then check every joint hot and cold and recheck the clamps after the first running period as the hose beds down
🔄 Supersession & Cross Reference
Other-Brand OEM Numbers
- VOE21576047
Aftermarket / Verified Equivalents
- Associated charge-air cooler: 21776918
- Associated housing: 21692360
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
🔎 Full Model Compatibility
Typically suits:
- Volvo Penta D6-340I-G, D6-380I-G, D6-440I-G, D6-480I-G, D6-300A-G, D6-340A-G, D6-380A-G, D6-440I-WJ-G, D6-480I-WJ-G, D6-300D-G, D6-340D-G, D6-380D-G, D6-440D-G, D6-480D-G, D6-400A-G, D6-440A-G, D6-300I-G
- Volvo Penta D4-175I-G, D4-230I-G, D4-270I-G, D4-320I-G, D4-300I-G, D4-150A-G, D4-230A-G, D4-270A-G, D4-320A-G, D4-300A-G, D4-145I-G
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
