21588609 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Factory support bracket used in the listed Volvo Penta D13 marine generator installation. It positions and restrains the associated component at the designed height and angle so hoses, wiring and adjoining hardware remain correctly aligned.

🚤 Compatibility

Typically suits:

• Volvo Penta D13B-E MG
• Volvo Penta D13B-E MG (FE)
• Volvo Penta D13B-F MG
• Volvo Penta D13B-F MG (FE)
• Volvo Penta D13C2-A MH
• Volvo Penta D13C1-B MG
• Volvo Penta D13C3-B MG
• Volvo Penta D13C2-A MG
• Volvo Penta D13C1-A MG
• Volvo Penta D13B-N MH
• Volvo Penta D13C3-B MH
• Volvo Penta D13C1-B MH

• Engine Family: D

⚙️ Key Features

• Application-specific hole pattern and offset
• Designed for the D13B-F MG (FE) installation
• Maintains component alignment and vibration support
• Use the specified fasteners and tightening torque
• Engine type: 13-litre inline six-cylinder diesel marine generator set

🔌 Function

Secures the associated component to the engine or installation frame and prevents movement that could load connected hoses or wiring.

⚠️ Common Signs of Failure

• Cracks around mounting holes or formed bends
• Loose component or abnormal vibration
• Misalignment of connected hoses, pipes or wiring
• Corrosion or loss of section thickness

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging