21610335 Carburetor | Genuine Volvo Penta Part
21610335 Carburetor | Genuine Volvo Penta Part
Couldn't load pickup availability
Available on request — contact us
As an authorised Volvo Penta dealer we can source parts through channels not shown online, and check supersession and used options for you
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Complete Holley 2300-style marine two-barrel carburetor for the listed Volvo Penta 5.0GL and 5.7GL petrol engines. Part 21610335 supersedes service references 3887700 and 3859068 and preserves the required marine calibration and linkage geometry.
🚤 Compatibility
Typically suits:
- Volvo Penta 5.0GL-C
- Volvo Penta 5.0GL-D
- Volvo Penta 5.0GL-E
- Volvo Penta 5.0GL-F
- Volvo Penta 5.0GL-FF
- Volvo Penta 5.0GL-HF
- Volvo Penta 5.0GL-J
- Volvo Penta 5.0GL-JF
- Volvo Penta 5.0GL-H
⚙️ Key Features
- Genuine Volvo Penta complete marine carburetor
- Holley 2300-style two-barrel architecture
- Calibrated for listed 5.0GL and 5.7GL V8 engines
- Marine fuel-bowl venting and throttle/choke geometry
- Repair-kit references should be matched to the carburetor identification number
- Engine type: GM-based 5.0-litre and 5.7-litre V8 spark-ignition petrol marine engine
- Also supersedes Volvo part numbers 21132570, 21211940 and 3859067
🔌 Function
Meters and atomises fuel into the intake air across starting, idle, acceleration and load conditions.
⚠️ Common Signs of Failure
- Hard starting, flooding or strong fuel odour
- Rough idle, stalling or poor low-speed control
- Hesitation or backfire when throttle is opened
- Rich/lean running and reduced power
- Fuel leakage, float/needle faults or blocked passages
🛠️ Service Notes
- Shut off the fuel and be ready to catch what is in the float bowl and lines; work with the compartment blower running and no source of ignition nearby
- Fit new gaskets at the manifold and at the fuel union, check the manifold face is clean and flat, and tighten evenly to the figures in the workshop manual for your engine
- Renew the fuel line sealing washers and check the lines and clips for chafe and hardening while access is good — a fuel leak in a closed engine space is the serious risk here
- Refit the flame arresting intake parts fully and securely before the engine is started, and leave factory settings alone except where the manual gives a procedure and a specification for your engine
- Check the whole fuel side by eye and by smell for leaks before the first start, then again with the engine warm and idling
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 21610335 → Supersedes 3859068 → Supersedes 3859057
OEM / Related Numbers
- 3887700 earlier number superseded by this part
- 3859068 earlier number superseded by this part
- 3859057 earlier number superseded by this part
- 21533400 carburetor repair kit
- 3858333 carburetor kit
Other-Brand OEM Numbers
- OMC/BRP 3859068 cross-reference
Aftermarket / Verified Equivalents
- Holley: 2300-series marine two-barrel carburetor calibrated to 3859068 / 3887700 specification
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
